Select one or more groups, or optionally provide a user JID using \
the form below. After selecting the appropriate affiliation (Owner/Admin/Member/Outcast), \
click the "Add" button to apply the change. When adding a single member, \
you can also reserve a nickname for a user in this room. If not set, username will be \
reserved as a nickname.
muc.room.affiliations.error_removing_user=Error removing the user/group. The room must have at least one owner.
muc.room.affiliations.error_banning_owner_by_admin=Error banning the user/group. As an admin, you cannot ban an owner.
muc.room.affiliations.error_banning_user=Error banning the user/group. Owners or Administrators cannot be banned.
muc.room.affiliations.error_banning_self=Error banning the user/group. You cannot ban yourself.
muc.room.affiliations.error_adding_user=Error adding the user/group. Please select a group or verify the user JID is correct.
muc.room.affiliations.user_added=User/Group added successfully.
muc.room.affiliations.user_removed=User/Group removed successfully.
muc.room.affiliations.permission=Room Affiliations
muc.room.affiliations.add_jid=Add User (JID):
muc.room.affiliations.add_jid_nickname=User nickname:
muc.room.affiliations.add_group=Select Group (one or more):
muc.room.affiliations.owner=Owner
muc.room.affiliations.admin=Admin
muc.room.affiliations.member=Member
muc.room.affiliations.outcast=Outcast
muc.room.affiliations.user=User
muc.room.affiliations.group=Group
muc.room.affiliations.room_owner=Room Owners
muc.room.affiliations.no_users=No Users or Groups
muc.room.affiliations.confirm_removed=Are you sure you want to remove this user/group from the list?
muc.room.affiliations.room_admin=Room Admins
muc.room.affiliations.room_member=Room Members
muc.room.affiliations.room_outcast=Room Outcasts
# Muc clear room chat history
muc.room.clear_chat.title=Clear Chat History
muc.room.clear_chat.info=Are you sure you want to clear the current chat history for the room
muc.room.clear_chat.detail=from the system?
muc.room.clear_chat.clear_command=Clear Chat History
muc.room.clear_chat.retraction_fallback_msg=A request to retract a previous message to clear chat history was received, but your client does not support this.
# Muc room delete Page
muc.room.delete.title=Destroy Room
muc.room.delete.info=Are you sure you want to destroy the room
muc.room.delete.detail=from the system? You may specify a reason for the room destruction and an \
alternative room address that will replace this room. This information will be sent to \
room occupants.
muc.room.delete.destruction_title=Destruction Details
muc.room.delete.room_id=Room ID:
muc.room.delete.reason=Reason:
muc.room.delete.alternate_address=Alternate Room Address:
muc.room.delete.alternate_address_password=Optional Password for Alternate Room:
muc.room.delete.destroy_room=Destroy Room
# Muc room edit form Page
muc.room.edit.form.title=Room Administration
muc.room.edit.form.create.title=Create New Room
muc.room.edit.form.edit.title=Room Settings
muc.room.edit.form.edited=Room settings edited successfully.
muc.room.edit.form.created=Room creation was successful.
muc.room.edit.form.info=Use the form below to edit the room settings.
muc.room.edit.form.room_id=Room ID
muc.room.edit.form.service=Service
muc.room.edit.form.users=Users
muc.room.edit.form.on=Created On
muc.room.edit.form.modified=Last Modified
muc.room.edit.form.change_room=Change the room settings of this room using the form below
muc.room.edit.form.persistent_room=Use the form below to create a new persistent room. The new room \
will be immediately available.
muc.room.edit.form.warning.room_is_locked=This room is locked since {0}. It is likely in process of being created. \
Users cannot join the room, until the room owner unlocks the room.
muc.room.edit.form.error_created_id=Error creating the room. A room with the request ID already exists.
muc.room.edit.form.error_created_privileges=Error creating the room. You do not have enough \
privileges to create rooms.
muc.room.edit.form.error_room_retired=Error creating the room. The specified room ID has been retired.
muc.room.edit.form.valid_hint=Please enter a valid ID, e.g. "test_room". Room ID's cannot contain \
spaces or other characters prohibited in JID nodes.
muc.room.edit.form.room_name=Room Name
muc.room.edit.form.valid_hint_name=Please enter a valid name.
muc.room.edit.form.description=Description
muc.room.edit.form.valid_hint_description=Please enter a valid description.
muc.room.edit.form.topic=Topic
muc.room.edit.form.valid_hint_subject=Please enter a valid topic.
muc.room.edit.form.valid_hint_subject_too_long=Topic is too long. Maximum 100 characters.
muc.room.edit.form.max_room=Maximum Room Occupants
muc.room.edit.form.none=Unlimited
muc.room.edit.form.empty_nolimit=(for unlimited, leave empty)
muc.room.edit.form.valid_hint_max_room=Please select the maximum room occupants.
muc.room.edit.form.broadcast=Broadcast Presence for
muc.room.edit.form.moderator=Moderator
muc.room.edit.form.participant=Participant
muc.room.edit.form.visitor=Visitor
muc.room.edit.form.required_password=Password Required to Enter
muc.room.edit.form.confirm_password=Confirm Password
muc.room.edit.form.new_password=Please make sure to enter the same new password.
muc.room.edit.form.discover_jid=Show Real JIDs of Occupants to
muc.room.edit.form.allowpm=Allowed to Send Private Messages
muc.room.edit.form.anyone=Anyone
muc.room.edit.form.role=Please select a role.
muc.room.edit.form.room_options=Room Options
muc.room.edit.form.list_room=List Room in Directory
muc.room.edit.form.room_moderated=Make Room Moderated
muc.room.edit.form.moderated_member_only=Make Room Members-only
muc.room.edit.form.invite_other=Allow Occupants to invite Others
muc.room.edit.form.change_subject=Allow Occupants to change Subject
muc.room.edit.form.reservednick=Only login with registered nickname
muc.room.edit.form.canchangenick=Allow Occupants to change nicknames
muc.room.edit.form.registration=Allow Users to register with the room
muc.room.edit.form.log=Log Room Conversations
muc.room.edit.form.preserve_hist_on_room_deletion=Preserve Chat History on Room Deletion
muc.room.edit.form.required_field=Required Field
# Muc room federation (FMUC) page
muc.room.federation.title=Federation
muc.room.federation.info=Use this page to configure federation of the MUC room (FMUC).
muc.room.federation.saved_successfully=Settings updated successfully.
muc.room.federation.experimental_warning=Federation (FMUC) functionality is an experimental feature, and is disabled by default! Please use the system property xmpp.muc.room.fmuc.enabled to enable it!
muc.room.federation.invalid_outbound_join_peer=The value for the room to federate with should be a valid JID (or empty).
muc.room.federation.form.boxtitle=Configuration
muc.room.federation.form.enabled=Allow federation functionality to be used for this room.
muc.room.federation.form.descr=Change the FMUC settings of this room using the form below.
muc.room.federation.form.outbound_jid=Establish FMUC federation with
# Muc room summary Page
muc.room.summary.title=Group Chat Rooms
muc.room.summary.info=Below is an overview of the Group Chat Rooms in the service
muc.room.summary.info2=. From here you can view the rooms, edit their properties, and create new rooms.
muc.room.summary.destroyed=Room destroyed successfully.
muc.room.summary.total_room=Total Rooms
muc.room.summary.sorted_id=Sorted by Room ID
muc.room.summary.room=Room
muc.room.summary.description=Description
muc.room.summary.persistent=Persistent
muc.room.summary.users=Users
muc.room.summary.edit=Edit
muc.room.summary.destroy=Destroy
muc.room.summary.cleared_chat=Cleared chat history
muc.room.summary.no_room_in_group=No rooms in the Group Chat service.
muc.room.summary.alt_persistent=Room is persistent
muc.room.summary.alt_temporary=Room is temporary
muc.room.summary.alt_locked=Room is locked (it is likely in process of being created).
muc.room.summary.service=Service
# Muc room Retirees Page
muc.room.retirees.title=Retired Group Chat Rooms
muc.room.retirees.info=This list shows all currently retired Group Chat Room names in the service
muc.room.retirees.info2=. When you delete a retired room name from below you bring it out of retirement, it is then available to use when creating new rooms.
muc.room.retirees.deleted=Room successfully brought out of retirement.
muc.room.retirees.total=Total Retirees
muc.room.retirees.sorted=Sorted by Room Name
muc.room.retirees.per_page=Retirees per page
muc.room.retirees.no_retirees=No retired rooms in the Group Chat service.
muc.room.retirees.alternate_jid=Alternate JID
muc.room.retirees.reason=Reason
muc.room.retirees.retired_at=Retired At
# MUC service summary Page
muc.service.summary.title=Group Chat Service
muc.service.summary.info=Below is an overview of the Group Chat Services in the system. From here you can \
edit their configurations, and create new services, and delete services you don't need anymore.
muc.service.summary.deleted=Service destroyed successfully.
muc.service.summary.total_room=Total Service
muc.service.summary.sorted_id=Sorted by Subdomain
muc.service.summary.subdomain=Subdomain
muc.service.summary.description=Description
muc.service.summary.numrooms=# Rooms
muc.service.summary.numusers=# Users
muc.service.summary.edit=Edit
muc.service.summary.destroy=Destroy
muc.service.summary.no_services=No group chat services configured.
muc.service.summary.total_services=Total Services
muc.service.summary.sorted=Sorted by Subdomain
muc.service.summary.services_per_page=Services per page
muc.service.summary.no_services_warning=There are no group chat services configured for this server. \
You will need to create a new service if you wish to provide MUC/group chat services.
# MUC delete service page
muc.service.delete.title=Delete MUC Service
muc.service.delete.info=Are you sure you want to destroy the MUC service
muc.service.delete.detail=from the system? You may specify a reason for the service destruction. \
This information will be sent to occupants of rooms on the service.
muc.service.delete.destruction_title=Destruction Details
muc.service.delete.service_name=Subdomain:
muc.service.delete.reason=Reason:
muc.service.delete.destroy_service=Destroy Service
# Muc tasks Page
muc.tasks.title=Other Settings
muc.tasks.info=Use the forms below to configure settings for kicking idle users from group chat rooms \
and to configure the task that logs room conversations to the database.
muc.tasks.update=Idle user settings updated successfully.
muc.tasks.log=Conversation logging settings updated successfully.
muc.tasks.valid_idel_minutes=Please enter a valid number for max idle minutes.
muc.tasks.valid_batchsize=Please enter a valid number for batch size.
muc.tasks.valid_batchinterval=Please enter a valid number for batch interval.
muc.tasks.valid_batchgrace=Please enter a valid number for batch grace period, that is shorter than the batch interval period.
muc.tasks.user_setting=Idle User Settings
muc.tasks.ping_user=Check if users are still connected after they have been idle for
muc.tasks.never_kick=Never kick idle users.
muc.tasks.kick_user=Kick users after they have been idle for
muc.tasks.conversation.logging=Conversation Logging
muc.tasks.maxbatchsize=Maximum batch size
muc.tasks.maxbatchinterval=Maximum batch time (millis)
muc.tasks.batchgrace=Maximum wait for new batch content (millis)
muc.tasks.pingtime_short=Checking if users are still connected after they have been idle for this amount of minutes has a significant chance of removing users that are in fact not disconnected. Consider increasing the amount of time.
# Muc cache Page
muc.room_cache.title=Room Cache Information
muc.room_cache.info=
muc.room_cache.local_cache=Local to this node
muc.room_cache.shared_cache=Shared between nodes
muc.room_cache.room_name=Room name
muc.room_cache.occupant_registry=Occupant registry
muc.room_cache.description=Description
muc.room_cache.topic=Topic
muc.room_cache.occupants=Occupants
muc.room_cache.moderators=Moderators
muc.room_cache.owners=Owners
muc.room_cache.admins=Admins
muc.room_cache.members=Members
# MUC Statistics
muc.stats.occupants.name=Group Chat: Occupants
muc.stats.occupants.description=Number of occupants in group chat rooms
muc.stats.occupants.label=Total Room Occupants
muc.stats.users.name=Group Chat: Connected Users
muc.stats.users.description=Number of users using the group chat service
muc.stats.users.label=Connected Users
muc.stats.incoming.name=Group Chat: Traffic
muc.stats.incoming.description=Rate of Group Chat messages
muc.stats.incoming.label=Incoming Messages
muc.stats.incoming.amount.name=Group Chat: Traffic
muc.stats.incoming.amount.description=Amount of Group Chat messages
muc.stats.incoming.amount.label=Incoming Messages
muc.stats.outgoing.name=Group Chat: Traffic
muc.stats.outgoing.description=Rate of Group Chat messages
muc.stats.outgoing.label=Outgoing Messages
muc.stats.outgoing.amount.name=Group Chat: Traffic
muc.stats.outgoing.amount.description=Amount of Group Chat messages
muc.stats.outgoing.amount.label=Outgoing Messages
muc.stats.active_group_chats.name = Group Chat: Rooms
muc.stats.active_group_chats.desc = The number of group chat rooms that have been active over time.
muc.stats.active_group_chats.units = Group chat Rooms
# Offline messages Page
offline.messages.title=Offline Messages
offline.messages.update=Settings updated successfully.
offline.messages.info=XMPP provides the option for servers to store-and-forward IM messages when they \
are sent to a user that is not logged in. Supporting store-and-forward of 'offline messages' \
can be a very convenient feature of an XMPP deployment. However, offline messages, like email, \
can take up a significant amount of space on a server. There are several options for handling \
offline messages; select the policy that best suites your needs.
offline.messages.size=Current size of all offline messages:
offline.messages.policy=Offline Message Policy
offline.messages.never_back=Never store offline messages and bounce messages back to the sender.
offline.messages.never_store=Never store offline messages and drop messages so the sender is not notified.
offline.messages.storage_openfire=Store offline messages for later retrieval. Messages will be delivered \
the next time the recipient logs in. Choose a storage policy and storage store max size below.
offline.messages.always_store=Always Store
offline.messages.always_store_info=Always store messages, even if the max storage size has been exceeded.
offline.messages.bounce=Store or Bounce
offline.messages.bounce_info=Store messages up to the max storage size. After the max size has been exceeded, \
bounce the message back to the sender.
offline.messages.drop=Store or Drop
offline.messages.drop_info=Store messages for a user up to the max storage size. After the max size has been \
exceeded, silently drop messages.
offline.messages.storage_limit=Per-user offline message storage limit:
offline.messages.choose_policy=Please choose a valid storage policy.
offline.messages.enter_store_size=Please enter a store size greater than 0 bytes.
offline.messages.bounce_option=Bounce
offline.messages.drop_option=Drop
offline.messages.store_option=Store
offline.messages.clean.title=Clean offline messages
offline.messages.clean.label=Enable message cleaning
offline.messages.clean.description=Automatic cleaning of outdated offline messages
offline.messages.clean.timer.description=Checking for outdated offline messages (Minutes)
offline.messages.clean.timer.label=Timer
offline.messages.clean.daystolive.label=Retention time
offline.messages.clean.daystolive.description=Days to keep offline messages for retrieval
# Private data settings Page
private.data.settings.title=Private Data
private.data.settings.update=Settings updated successfully.
private.data.settings.info=Private data storage allows XMPP clients to store settings, bookmarks, etc. on the \
server. Users can log into their account and their settings will follow them around (as opposed to having \
the clients store the settings on the local computer where their settings will not follow them). You may \
enable or disable this feature.
private.data.settings.policy=Set Private Data Policy
private.data.settings.enable_storage=Enable Private Data Storage
private.data.settings.enable_storage_info=allow clients to store information on the server.
private.data.settings.disable_storage=Disable Private Data Storage
private.data.settings.disable_storage_info=do not allow server-side storage.
# Reg settings Page
reg.settings.title=Registration Settings
reg.settings.info=Use the forms below to change various aspects of user registration and login.
reg.settings.update=Settings updated successfully.
reg.settings.inband_account=Inband Account Registration
reg.settings.inband_account_info=Inband account registration allows users to create accounts on the server \
automatically using most clients. It does not affect the ability to create new accounts through \
this web administration interface. Administrators may want to disable this option so users are \
required to register by other means (e.g. sending requests to the server administrator or through \
your own custom web interface).
reg.settings.inband_account_readonly=This instance of Openfire is set up to integrate with an external user provider, \
that is considered to be 'read-only'. Inband account registration is therefore not possible.
reg.settings.enable=Enabled
reg.settings.auto_create_user=Users can automatically create new accounts.
reg.settings.disable=Disabled
reg.settings.not_auto_create=Users can not automatically create new accounts.
reg.settings.change_password=Change Password
reg.settings.change_password_info=You can choose whether users are allowed to change their password. \
Password changing is independent of inband account registration. However, you may only \
want to disable this feature when disabling inband account registration.
reg.settings.change_password_readonly=This instance of Openfire is set up to integrate with an external user provider, \
that is considered to be 'read-only'. Users cannot change their passwords.
reg.settings.can_change=Users can change their password.
reg.settings.cannot_change=Users are not allowed to change their password.
reg.settings.anonymous_login=Anonymous Login
reg.settings.anonymous_login_info=You can choose to enable or disable anonymous user login. If it is \
enabled, anyone can connect to the server and create a new session. If it is disabled only \
users who have accounts will be able to connect.
reg.settings.anyone_login=Anyone may log in to the server.
reg.settings.only_registered_login=Only registered users may log in.
reg.settings.allowed_ips=Restrict Login
reg.settings.allowed_ips_info=Use the form below to define the IP addresses or IP address ranges \
that are allowed to log in. E.g.: 200.120.90.10, 200.125.80.0/24, 2001:db8::/48. Leaving the form empty means \
that clients will be able to connect from any IP address (unless a blacklist is in place).
reg.settings.ips_all=Restrict ALL (including anonymous) logins to these IP's:
reg.settings.ips_anonymous=Restrict anonymous logins to these IP's:
reg.settings.allowed_ips_blocked_info=Use the form below to define the IP addresses or IP address ranges \
that are not allowed to log in. E.g.: 200.120.90.10, 200.125.80.0/24, 2001:db8::/48. Leaving the form empty means \
that clients will be able to connect from any IP address, unless a whitelist (see below) is in place. \
Note that entries on the 'blocked' list (here) will always take precedence over entries on the 'allowed' \
lists below.
reg.settings.ips_blocked=Do not allow any logins from these IP's:
reg.settings.confirm_delete_ip=Are you sure you want to remove IP address/range \\''{0}\\'' from the list?
reg.settings.block-value=Block IP (or IP-range):
reg.settings.block-value.invalid=The value that was provided to add to the blocklist was not a valid IP address or a valid IP address range. Valid notations includes singular IP addresses (eg: 198.51.100.19 or: 2001:db8:0:0:0:0:0:19), CIDR notation (eg: 198.51.100.0/22 or: 2001:db8::/48) and range notations (eg: 198.51.100.0-198.51.103.255 or: 2001:db8:0:0:0:0:0:0-2001:db8:0:ffff:ffff:ffff:ffff:ffff). Do not use []-notation for IPv6.
reg.settings.allow-value=Allow IP (or IP-range):
reg.settings.allow-value.invalid=The value that was provided to add to the allowlist was not a valid IP address or a valid IP address range. Valid notations includes singular IP addresses (eg: 198.51.100.19 or: 2001:db8:0:0:0:0:0:19), CIDR notation (eg: 198.51.100.0/22 or: 2001:db8::/48) and range notations (eg: 198.51.100.0-198.51.103.255 or: 2001:db8:0:0:0:0:0:0-2001:db8:0:ffff:ffff:ffff:ffff:ffff). Do not use []-notation for IPv6.
reg.settings.future_users=Future Users
reg.settings.future_users_info=In certain configurations and/or highly specific conditions, XMPP functionality can be invoked for a particular user before that user is known to Openfire. An example of this is a scenario in which users are automatically provisioned, which, again, under very specific conditions, can be allowed with specific configuration. Ordinarily, Openfire rejects XMPP functionality in context of a particular user when it does not know of this user. With the configuration below, this behavior can be overridden: when enabling 'Future Users', Openfire will not reject certain XMPP functionality for users that it does not recognize. Instead, it is assumed that the user will be provisioned shortly. This can be used, for example, to record offline messages sent to a user, before that user is provisioned.
reg.settings.future_users_enabled=Allow XMPP functionality that relates to users not (yet) recognized by Openfire.
reg.settings.future_users_disabled=Reject XMPP functionality that relates to users not currently recognized by Openfire.
reg.settings.sasl_mechanisms=SASL Mechanisms
reg.settings.sasl_mechanisms_info=The SASL mechanisms configured below control the mechanism used for authentication. \
Each mechanism has its own characteristics. The form below is used to control which SASL mechanisms are \
enabled in Openfire. An implementation must be available for the mechanism to be used, but even if one is, the \
mechanism might not be offered to clients after all: this could depend on mechanism-specific server settings.
reg.settings.sasl_mechanisms_columntitle_enabled=Enabled
reg.settings.sasl_mechanisms_columntitle_name=Name
reg.settings.sasl_mechanisms_columntitle_implementation=Implementation available
reg.settings.sasl_mechanisms_columntitle_supported=Offered to clients
reg.settings.sasl_mechanisms_columntitle_description=Description
reg.settings.description.none=(no description available)
reg.settings.description.JIVE-SHAREDSECRET=Proprietary Openfire SASL mechanism that is based on a shared secret.
reg.settings.description.EXTERNAL=Where authentication is implicit in the context (e.g., for protocols already using IPsec or TLS).
reg.settings.description.ANONYMOUS=For unauthenticated guest access.
reg.settings.description.PLAIN=Simple cleartext password mechanism.
reg.settings.description.OTP=One-time password mechanism.
reg.settings.description.SKEY=An S/KEY mechanism.
reg.settings.description.CRAM-MD5=Simple challenge-response scheme based on HMAC-MD5.
reg.settings.description.DIGEST-MD5=Challenge-response scheme based upon MD5. DIGEST-MD5 offered a data security layer.
reg.settings.description.SCRAM-SHA-1=Salted challenge-response scheme based on SHA-1.
reg.settings.description.SCRAM=Challenge-response scheme based mechanism with channel binding support.
reg.settings.description.NTLM=NT LAN Manager authentication mechanism.
reg.settings.description.GSSAPI=Kerberos V5 authentication via the GSSAPI. GSSAPI offers a data-security layer.
reg.settings.description.EAP-AES128=GSS EAP authentication.
reg.settings.description.OAUTHBEAERER=OAuth, an authentication protocol for delegated resource access.
reg.settings.description.OAUTH10A=OAuth, an authentication protocol for delegated resource access.
# Server db Page
server.db.title=Database Properties
server.db.info=Below is a list of properties for your database and the JDBC driver.
server.db.connect_info=Database Connection Info
server.db.version=Database and Version:
server.db.jdbc=JDBC Driver:
server.db.jdbc_driver=JDBC Driver Version:
server.db.connect_url=DB Connection URL:
server.db.user=DB User:
server.db.transaction=Transaction Support:
server.db.transaction_level=Transaction Isolation Level:
server.db.multiple_connect=Supports multiple connections
server.db.multiple_connect2=open at once:
server.db.read_only_mode=In read-only mode:
server.db.pool_info=Connection Pool Info
server.db.house_keeping_sleep=Housekeeping Interval:
server.db.house_keeping_sql=Connection Test SQL:
server.db.connection_lifetime=Maximum Connection Lifetime:
server.db.connection_max=Maximum Connections:
server.db.connection_min=Minimum Connections:
server.db.test_after_use=Test Connection After Use:
server.db.test_before_use=Test Connection Before Use:
server.db.connections=Connections:
server.db.connections.active=active
server.db.connections.available=available
server.db.connections.max=max
server.db.connections_served=Connections Served:
server.db.connections_refused=Connections Refused:
server.db.connection_idle_time=Minimum Idle Time:
server.db.connection_max_wait_time=Maximum Wait Time:
server.db.test_timeout=Test Timeout:
server.db.connection_mean_borrow_time=Average time waited:
server.db.connection_max_borrow_time=Max time waited:
server.db_stats.title=Database Query Statistics
server.db_stats.description=Enable database query statistics to trace all database queries made. \
This can be useful to debug issues and monitor database performance. However, it's \
not recommended that you leave query statistics permanently running, as they will cause \
performance to degrade slightly.
server.db_stats.status=Query Statistics Status
server.db_stats.enabled=Enabled
server.db_stats.disabled=Disabled
server.db_stats.update=Update
server.db_stats.refresh=Refresh
server.db_stats.refresh_now=Refresh Now
server.db_stats.none=none
server.db_stats.settings=Query Statistics Settings
server.db_stats.seconds=seconds
server.db_stats.clear_stats=Clear All Stats
server.db_stats.select_stats=SELECT Query Statistics
server.db_stats.insert_stats=INSERT Query Statistics
server.db_stats.update_stats=UPDATE Query Statistics
server.db_stats.delete_stats=DELETE Query Statistics
server.db_stats.operations=Total # of operations
server.db_stats.total_time=Total time for all operations (ms)
server.db_stats.avg_rate=Average time for each operation (ms)
server.db_stats.total_rate=Operations per second
server.db_stats.queries=Most common SQL queries
server.db_stats.query=Query
server.db_stats.count=Count
server.db_stats.time=Total Time
server.db_stats.average_time=Avg. Time
server.db_stats.no_queries=No queries
#
# System property descriptions
#
system_property.avatar.xep0398.disabled=Disables functionality that converts vCard-based avatars in PEP-based avatars and vice versa (as defined by XEP-0398).
system_property.cache.checks.consistency.enabled=Controls if caches are periodically checked for consistency (beware: this can be very resource intensive).
system_property.cache.checks.consistency.delay=The duration after which the first consistency check is executed after system start or reconfiguration.
system_property.cache.checks.consistency.period=The frequency in which consistency checks for caches is executed.
system_property.cache.reverselookup.optimization.disabled=The cache entry listener implementation that maintains a reverse lookup map for the cache that is being observed has various optimizations that improve processing of out-of-order events. These optimizations can be disabled using this property.
system_property.log.debug.enabled=Controls the output of DEBUG level logs
system_property.log.trace.enabled=Controls the output of TRACE level logs
system_property.passwordKey=Used by the DefaultAuthProvider to encrypt passwords. If this property is changed, it will \
not be possible to authenticate users until their passwords are reset.
system_property.rss.enabled=Controls if the admin console shows data from an RSS feed.
system_property.rss.url=The URL from where to obtain the RSS feed that's shown on the admin console.
system_property.rss.refresh=The duration that RSS feed data shown on the admin console is cached.
system_property.update.lastCheck=The last time a check was made for available updates
system_property.update.frequency=How often, in hours, to check for available updates
system_property.update.service-enabled=Determines if the automatic check for updates is performed
system_property.update.notify-admins=Determines if the administrators receive a message when an update is found
system_property.update.proxy.host=The proxy to use, if any, when checking for updates
system_property.update.proxy.port=The port on the proxy to use, or -1 if no proxy
system_property.xmpp.session.conflict-limit=-1 to never kick off existing sessions when another session with the same \
full JID joins, otherwise the number of login attempts before the existing session is kicked
system_property.provider.auth.className=The class to use to authenticate users
system_property.authorizationBasedUserMapper.adminProvider.className=The classname of the UserProvider which will serve the administrative users, when using authorization-based user mapping.
system_property.authorizationBasedUserMapper.userProvider.className=The classname of the UserProvider which will serve the regular, non-administrative users, when using authorization-based user mapping.
system_property.hybridAuthProvider.primaryProvider.className=The first class the HybridAuthProvider should use to authenticate users.
system_property.hybridAuthProvider.primaryProvider.config=Configuration value for the first class used by the HybridAuthProvider.
system_property.hybridAuthProvider.secondaryProvider.className=The second class the HybridAuthProvider should use to authenticate users.
system_property.hybridAuthProvider.secondaryProvider.config=Configuration value for the second class used by the HybridAuthProvider.
system_property.hybridAuthProvider.tertiaryProvider.className=The third class the HybridAuthProvider should use to authenticate users.
system_property.hybridAuthProvider.tertiaryProvider.config=Configuration value for the third class used by the HybridAuthProvider.
system_property.hybridGroupProvider.primaryProvider.className=The first class the HybridGroupProvider should use to get groups from.
system_property.hybridGroupProvider.primaryProvider.config=Configuration value for the first class used by the HybridGroupProvider.
system_property.hybridGroupProvider.secondaryProvider.className=The second class the HybridGroupProvider should use to get groups from.
system_property.hybridGroupProvider.secondaryProvider.config=Configuration value for the second class used by the HybridGroupProvider.
system_property.hybridGroupProvider.tertiaryProvider.className=The third class the HybridGroupProvider should use to get group from.
system_property.hybridGroupProvider.tertiaryProvider.config=Configuration value for the third class used by the HybridGroupProvider.
system_property.hybridUserPropertyProvider.primaryProvider.className=The first class the HybridUserPropertyProvider should use to get user properties from.
system_property.hybridUserPropertyProvider.primaryProvider.config=Configuration value for the first class used by the HybridUserPropertyProvider.
system_property.hybridUserPropertyProvider.secondaryProvider.className=The second class the HybridUserPropertyProvider should use to get user properties from.
system_property.hybridUserPropertyProvider.secondaryProvider.config=Configuration value for the second class used by the HybridUserPropertyProvider.
system_property.hybridUserPropertyProvider.tertiaryProvider.className=The third class the HybridUserPropertyProvider should use to get user properties from.
system_property.hybridUserPropertyProvider.tertiaryProvider.config=Configuration value for the third class used by the HybridUserPropertyProvider.
system_property.hybridUserProvider.primaryProvider.className=The first class the HybridUserProvider should use to get users from.
system_property.hybridUserProvider.primaryProvider.config=Configuration value for the first class used by the HybridUserProvider.
system_property.hybridUserProvider.secondaryProvider.className=The second class the HybridUserProvider should use to get users from.
system_property.hybridUserProvider.secondaryProvider.config=Configuration value for the second class used by the HybridUserProvider.
system_property.hybridUserProvider.tertiaryProvider.className=The third class the HybridUserProvider should use to get users from.
system_property.hybridUserProvider.tertiaryProvider.config=Configuration value for the third class used by the HybridUserProvider.
system_property.propertyBasedUserMapper.fallbackProvider.className=The fallback user provider used by PropertyBasedUserProviderMapper, when no other mapper can provide a user.
system_property.admin.authorizedJIDs=The bare JID of every admin user for the DefaultAdminProvider
system_property.xmpp.auth.ssl.context_protocol=The TLS protocol to use for encryption context initialization, overriding the Java default.
system_property.xmpp.parser.buffer.size=Maximum size of an XMPP stanza. Larger stanzas will cause a connection to be closed.
system_property.xmpp.auth.ssl.enforce_sni=Controls if the server enforces the use of SNI (Server Name Indication) when clients connect using TLS.
system_property.xmpp.socket.backlog=Sets the maximum number of incoming connection requests that can be queued before the OS starts rejecting new connections.
system_property.xmpp.socket.keepalive=Enables TCP keep-alive on the socket to periodically check if the connection is still alive and prevent idle connections from being silently dropped.
system_property.xmpp.socket.tcp-nodelay=Controls whether the Nagle algorithm is disabled (true) to send small packets immediately or enabled (false) to coalesce them.
system_property.xmpp.socket.tcp-reuseaddr=Allows the socket to bind to a port even if a previous connection on that port is in the TIME_WAIT state, enabling faster server restarts.
system_property.xmpp.socket.buffer.send=Defines the size (in bytes) of the TCP send buffer for accepted sockets.
system_property.xmpp.socket.buffer.receive=Defines the size (in bytes) of the TCP receive buffer for accepted sockets.
system_property.xmpp.socket.linger=Specifies how long a socket should wait to send remaining data when closed; negative disables SO_LINGER.
system_property.xmpp.socket.startup-latch-timeout=Timeout in seconds to wait for the boss EventLoop to process the startup barrier task before logging a warning.
system_property.xmpp.socket.ssl.active=Set to true to enable Direct TLS encrypted connections for clients, otherwise false
system_property.xmpp.socket.ssl.certificate.revocation.only-end-entity=Only verify revocation status of end-entity (leaf) certificates
system_property.xmpp.socket.ssl.certificate.revocation.soft-fail=Allow validation to continue if revocation information is unavailable
system_property.xmpp.socket.write-timeout-seconds=The write timeout time in seconds to handle stalled sessions and prevent DoS
system_property.xmpp.component.ssl.active=Set to true to enable Direct TLS encrypted connections for external components, otherwise false
system_property.xmpp.server.startup.retry.delay=Set to a positive value to allow a retry of a failed startup after the specified duration.
system_property.sasl.realm=The realm used for SASL authentication, which can be used when realms that are passed through SASL are different from the XMPP domain name.
system_property.sasl.approvedRealms=A collection of realm names that can be used for SASL authentication. This can be used when realms that are passed through SASL are different from the XMPP domain name.
system_property.sasl.proxyAuth=Controls if Openfire's default authorization policy allows authentication identities (identity whose password will be used) that are different from authorization identities (identity to act as).
system_property.xmpp.auth.ignorecase=Controls if Openfire's default authorization policy is case-sensitive.
system_property.sasl.scram-sha-1.iteration-count=The number of iterations when salting a users password. Changing this \
value will not affect existing passwords, only when passwords are updated
system_property.xmpp.auth.anonymous=Set to true to allow anonymous login, otherwise false
system_property.xmpp.auth.external.client.skip-cert-revalidation=Set to true to avoid validation of the client-provided PKIX certificate (for mutual authentication) other than the validation that happens when the TLS session is established.
system_property.xmpp.auth.external.server.require-authzid=Require the peer to provide an authorization identity through SASL (typically in the Initial Response) when authenticating an inbound S2S connection that uses the EXTERNAL SASL mechanism. This is not required by the XMPP protocol specification, but it was required by Openfire versions prior to release 4.8.0. This configuration option is added to allow for backwards compatibility.
system_property.xmpp.auth.external.server.skip-sending-authzid=Send an authorization identity in the Initial Response when attempting to authenticate using the SASL EXTERNAL mechanism with a remote XMPP domain. Sending the authzid in this manner is not required by the XMPP protocol specification, but is recommended in XEP-0178 for compatibility with older server implementations.
system_property.xmpp.auth.ssl.default-trustmanager-impl=The class to use as the default TLS TrustManager (which checks certificates from peers).
system_property.xmpp.client.csi.enabled=Controls if Client State Indication (XEP-0352) functionality is supported by Openfire.
system_property.xmpp.client.csi.delay.enabled=Determines if 'unimportant' stanzas are delayed for a client that is inactive.
system_property.xmpp.client.csi.delay.max-duration=Determines the maximum duration of stanzas being delayed for a client that is inactive.
system_property.xmpp.client.csi.delay.queue.capacity=Determines the maximum length of the queue that holds delayed stanzas.
system_property.xmpp.client.idle=How long, in milliseconds, before idle client sessions are dropped. Set to -1 to never drop idle sessions.
system_property.xmpp.client.idle.ping=Set to true to ping idle clients, otherwise false
system_property.xmpp.client.limits.advertisement.disabled=Disables the advertisement of server limits in the XMPP stream features (XEP-0478) on client connections.
system_property.xmpp.client.version-query.enabled=Send a version request query to clients when they connect.
system_property.xmpp.client.version-query.delay=After this amount of time has passed since a new client connection has been accepted, a version request is being sent to the peer.
system_property.xmpp.gateway.enabled=Controls if Openfire's 'trunking' or 'gateway' functionality is enabled. This feature allows Openfire to act as a gateway to transfer data between other XMPP domains.
system_property.xmpp.gateway.domains=A collection of XMPP domain names for which Openfire will provide trunking functionality. For each domain in this collection, Openfire will accept data from other domains, and forward that data to that domain.
system_property.xmpp.server.rewrite.replace-missing-to=If the server receives a message or IQ stanza with no 'to' attribute, set the 'to' attribute to the bare JID representation of the 'from' attribute value.
system_property.xmpp.server.incoming.skip-jid-validation=Controls if JIDs that are in the addresses of stanzas supplied by remote domains are validated.
system_property.xmpp.server.outgoing.max.threads=Maximum amount of threads in the thread pool that is used to establish outbound server-to-server connections. Surplus connections will be created on the calling thread, possibly / gracefully slowing down other operations considerably.
system_property.xmpp.server.outgoing.min.threads=Minimum amount of threads in the thread pool that is used to establish outbound server-to-server connections
system_property.xmpp.server.outgoing.threads-timeout=Amount of time after which idle, surplus threads are removed from the thread pool that is used to establish outbound server-to-server connections.
system_property.xmpp.server.outgoing.queue=Maximum amount of stanzas that are queued while waiting for an outbound server-to-server connection to be established.
system_property.xmpp.server.outgoing.close-wait-timeout=The maximum amount of time to wait for a previous outgoing server-to-server session to fully complete its teardown before establishing a new one. If this timeout expires, the new session will be established regardless. Increasing this value reduces the risk of the new session colliding with stale state left by the previous one, at the cost of delaying recovery from dropped connections.
system_property.xmpp.server.session.initialise-timeout=Maximum amount of time in seconds for an outbound S2S session to be initialised
system_property.xmpp.server.session.redelivery-timeout=Maximum time in seconds to wait for an outgoing server session's teardown to complete before abandoning a stanza re-delivery attempt.
system_property.xmpp.server.session.idle=How long, in milliseconds, before idle inbound server sessions are dropped. Set to -1 to never drop idle sessions.
system_property.xmpp.server.limits.advertisement.disabled=Disables the advertisement of server limits in the XMPP stream features (XEP-0478) on server connections.
system_property.xmpp.server.permission-apply-recursive=Defines if the permission setting for server-to-server connection applies recursively for subdomains.
system_property.xmpp.socket.netty.graceful-shutdown.quiet-period=The inactivity duration after which a Netty executor can be shutdown gracefully.
system_property.xmpp.socket.netty.graceful-shutdown.timeout=The maximum amount of time to wait until a Netty executor is shutdown regardless if a task was submitted during the quiet period.
system_property.xmpp.component.idle=How long, in milliseconds, before idle component sessions are dropped. Set to -1 to never drop idle sessions.
system_property.xmpp.multiplex.idle=How long, in milliseconds, before idle multiplexer sessions are dropped. Set to -1 to never drop idle sessions.
system_property.cluster-monitor.service-enabled=Set to true to send messages to admins on cluster events, otherwise false
system_property.ldap.override.avatar=Set to true to save avatars in the local database, otherwise false
system_property.xmpp.domain=The XMPP domain of this server. Do not change this property directly, instead re-run the setup process.
system_property.xmpp.xml.xml-declaration.suppress=Controls if an XML declaration is generated before a 'stream' open tag is sent.
system_property.xmpp.xml.xml-declaration.suppress-newline=Controls if a newline is added after a generated XML declaration and the 'stream' open tag.
system_property.plugins.unloading.directory.destroy.delay=A delay that is observed between the time a plugin's unloading starts, and the plugin directory actually being removed.
system_property.plugins.unloading.directory.destroy.timeout=The maximum time that Openfire will wait for a plugin directory to be destroyed after the plugin is unloaded.
system_property.xmpp.ratelimit.newconnections.c2s.enabled=Enables or disables rate limiting for new client-to-server (C2S) connections.
system_property.xmpp.ratelimit.newconnections.c2s.max_burst=The maximum number of new client-to-server connection attempts that can be accepted in a short burst. Helps absorb spikes without exceeding the sustained rate.
system_property.xmpp.ratelimit.newconnections.c2s.permits_per_second=The sustained rate of new client-to-server connection attempts allowed per second. This applies to all C2S types (TCP, BOSH, WebSocket) combined.
system_property.xmpp.ratelimit.newconnections.logging.suppress=The minimum time to suppress repeated log messages for rejected new connection attempts of the same connection type; a value of zero or less disables log suppression.
system_property.xmpp.ratelimit.newconnections.s2s.enabled=Enables or disables rate limiting for new server-to-server (S2S) connections.
system_property.xmpp.ratelimit.newconnections.s2s.max_burst=The maximum number of new server-to-server connection attempts that can be accepted in a short burst. Allows temporary bursts without violating the sustained rate.
system_property.xmpp.ratelimit.newconnections.s2s.permits_per_second=The sustained rate of new server-to-server connection attempts allowed per second. Applies to all S2S (federation) connection types, which currently is just TCP.
system_property.plugins.upload.enabled=Defines if the admin console can be used to upload plugins.
system_property.plugins.upload.content-type-check.enabled=Determines if the content-type of uploaded plugin files is verified.
system_property.plugins.upload.content-type-check.expected-value=Defines the expected content-type of uploaded plugin files.
system_property.plugins.upload.magic-number.values.enabled=Enables verification of 'magic bytes' when processing uploaded data that is expected to be an Openfire plugin.
system_property.plugins.upload.magic-number.values.expected-value=A list of hexadecimal representations of 'magic byte' sequences that can be used to identify an uploaded plugin file.
system_property.plugins.upload.pluginxml-check.enabled=Checks the presence of a 'plugin.xml' file in uploaded plugin files.
system_property.provider.admin.className=The class to use to authorise Openfire administrators
system_property.provider.group.className=The class to use to determine which groups Openfire users belong to
system_property.provider.group.groupBasedAdminProvider.groupName=The name of the group used to identify administrators by the GroupAdminProvider
system_property.provider.lockout.className=The class to use to lock-out Openfire users on repeated authentication failures
system_property.provider.pubsub-persistence.className=The class used to persist pubsub data.
system_property.provider.pubsub-persistence.caching.delegate-className=The class used by the cache delegate to persist pubsub data.
system_property.xmpp.pubsub.flush.timer=Interval in which the write-behind cache for the pubsub provider flushes data to its delegate.
system_property.xmpp.pubsub.flush.max=Maximum number of unflushed item changes allowed to exist in the write-behind cache for the pubsub provider. Reaching this value will trigger a flush.
system_property.provider.securityAudit.className=The class to use to audit actions performed by administrators
system_property.provider.user.className=The class to use to provide the Openfire users
system_property.provider.vcard.className=The class to use to provide vCard handling
system_property.usermanager.remote-disco-info-timeout-seconds=The maximum time the UserManager should wait, in seconds, for the remote server to respond to a disco#info request to confirm the presence of a user
system_property.usermanager.future-users.enable=When enabled, allows Openfire to process data for local JIDs that potentially are future users. To be used when users are provisioned externally/on an ad-hoc basis.
system_property.provider.userproperty.className=The class to use to provide user properties
system_property.xmpp.auth.sasl.external.client.suppress-matching-realmname=Ignore the realm of a SASL EXTERNAL provided username if it matches the XMPP domain name.
system_property.xmpp.auth.sasl.external.server.require-authzid=Require servers to send a non-empty authorization ID during the SASL EXTERNAL handshake, even if the stream 'from' attribute already specifies one.
system_property.adminConsole.access.ip-blocklist=List of IP addresses that are not allowed to access the admin console.
system_property.adminConsole.access.ip-allowlist=List of IP addresses that are allowed to access the admin console. When empty, this list is ignored.
system_property.adminConsole.access.ignore-excludes=Controls if IP Access lists are applied to excluded URLs.
system_property.adminConsole.access.allow-wildcards-in-excludes=Controls whether wildcards are allowed in URLs that are excluded from auth checks.
system_property.adminConsole.servlet-request-authenticator=The class to use to authenticate requests made to the admin console. If not supplied, normal username/password authentication will be used.
system_property.adminConsole.siteMinderHeader=The name of the HTTP header that will contain the CA SiteMinder/Single Sign-On authenticated user, if available.
system_property.adminConsole.stop-timeout=Duration of the maximum duration of gracefully stopping the embedded webserver that is hosting the admin console.
system_property.adminConsole.forwarded.enabled=Enable / Disable parsing a 'X-Forwarded-For' style HTTP header of Admin Console requests.
system_property.adminConsole.forwarded.for.header=The HTTP header name for 'forwarded for'.
system_property.adminConsole.forwarded.server.header=The HTTP header name for 'forwarded server'.
system_property.adminConsole.forwarded.host.header=The HTTP header name for 'forwarded hosts'.
system_property.adminConsole.forwarded.host.name=Sets a forced valued for the host header.
system_property.adminConsole.CSP.enabled=Enable / Disable adding a 'Content-Security-Policy' HTTP header to the response to requests made against the admin console.
system_property.adminConsole.CSP.responsevalue=The header value when adding a 'Content-Security-Policy' HTTP header to the response to requests made against the admin console.
system_property.adminConsole.maxAttemptsPerIP=Maximum number of Admin Console login attempts per IP address that can be performed in a given time frame.
system_property.adminConsole.perIPAttemptResetInterval=Time frame before Admin Console login attempts per IP address are reset.
system_property.adminConsole.maxAttemptsPerUsername=Maximum number of Admin Console login attempts per username that can be performed in a given time frame.
system_property.adminConsole.perUsernameAttemptResetInterval=Time frame before Admin Console login attempts per username are reset.
system_property.xmpp.muc.masterkey=A secret that is shared with all MUC services in the Openfire cluster. This value should never be changed after it has initially been generated.
system_property.xmpp.muc.extendedchannelsearch.enabled=Determine if the multi-user chat search feature described by XEP-0433: 'Extended Channel Search' is enabled.
system_property.xmpp.muc.muclumbus.v1-0.enabled=Determine if the multi-user chat "muclumbus" (v1.0) search feature is enabled.
system_property.xmpp.muc.join.presence=Setting the presence send of participants joining in MUC rooms.
system_property.xmpp.muc.join.self-presence-timeout=Maximum duration to wait for presence to be broadcast while joining a MUC room.
system_property.xmpp.muc.bulkretraction=Enable or disable the bulk retraction of messages in MUC rooms.
system_property.xmpp.muc.loading.timeout=Defines the maximum duration to wait for loading MUC rooms from the database at service startup. If the loading process exceeds this timeout, it will be aborted. A value of zero indicates that no timeout is configured, and the process may run indefinitely.
system_property.xmpp.muc.loading.workers=Controls the number of parallel workers used when loading MUC rooms from the database at service startup. A value of 1 loads rooms sequentially. Values 2-5 enable parallel loading which can improve startup time for services with many rooms, but increases database load. Consider your database's connection pool size and capacity before increasing this value.
system_property.ldap.authorizeField=Name of attribute in user's LDAP object used by the LDAP authorization policy.
system_property.ldap.pagedResultsSize=The maximum number of records to retrieve from LDAP in a single page. \
The default value of -1 means rely on the paging of the LDAP server itself. \
Note that if using ActiveDirectory, this should not be left at the default, and should not be set to more than the value of the ActiveDirectory MaxPageSize; 1,000 by default.
system_property.ldap.useRangeRetrieval=Enable range retrieval for processing of large LDAP groups
system_property.ldap.unencrypted-warning-suppression=Openfire will log a warning when interacting with LDAP using an unencrypted connection. To prevent flooding of the logfiles, subsequent warnings are suppressed for the duration configured by this property.
system_property.ldap.authCache.enabled=When enabled, user credentials obtained from a directory service (AD/LDAP) will be cached for a while.
system_property.ldap.authCache.size=Size (in bytes) of the cache in which user credentials obtained from a directory service are cached.
system_property.ldap.authCache.maxLifetime=Maximum time that user credentials obtained from a directory service are kept in cache.
system_property.xmpp.iqdiscoinfo.xformsoftwareversion=Set to false to not allow Software Version DataForm on InfoDisco response.
system_property.plugins.servlet.allowLocalFileReading=Determines if the plugin servlets can be used to access files outside of Openfire's home directory.
system_property.cert.storewatcher.enabled=Automatically reloads certificate stores when they're modified on disk.
system_property.stream.management.active=Offer Stream Management (XEP-0198) functionality to clients.
system_property.stream.management.location.enabled=Tell clients that request Stream Management (XEP-0198) to be enabled on what server to resume streams.
system_property.stream.management.location.terminate-others.enabled=When a Stream Management (XEP-0198) resumption attempt occurs on a cluster node that does not hold the detached session, terminate that session if it lives elsewhere in the cluster.
system_property.stream.management.max-server.enabled=Announce how long streams are allowed to linger in 'detached' mode before being terminated.
system_property.xmpp.muc.room.fmuc.enabled=Enables Federated MUC for Constrained Environments functionality (XEP-0289)
system_property.xmpp.pubsub.create.jid=Bare JIDs of users that are allowed to create nodes. An empty list means that anyone can create nodes.
system_property.xmpp.pubsub.sysadmin.jid=Bare JIDs of users that are system administrators of the PubSub service. A sysadmin has the same permissions as a node owner.
system_property.xmpp.pubsub.create.anyone=Returns the permission policy for creating nodes. A false value means that not anyone can create a node, only the JIDs listed in 'xmpp.pubsub.create.jid' are allowed to create nodes.
system_property.xmpp.offline.autoclean.daystolive=The time in days after which unread messages are removed from the offline message store
system_property.xmpp.offline.autoclean.checkinterval=The time in minutes after which the message store will be searched for unread messages to delete.
system_property.xmpp.offline.autoclean.enabled=Enable / Disable auto clean of unread messages
system_property.log.httpbind.enabled=Enable / disable logging of web binding (websocket and BOSH) requests and responses.
system_property.httpbind.enabled=Enable / disable web binding (websocket and BOSH) functionality.
system_property.httpbind.port.plain=TCP port on which the non-encrypted web binding endpoints (WS, HTTP) are exposed.
system_property.httpbind.port.secure=TCP port on which the encrypted web binding endpoints (WSS, HTTPS) are exposed.
system_property.httpbind.stop-timeout=Duration of the maximum duration of gracefully stopping the embedded webserver that is hosting the BOSH endpoint (among others).
system_property.httpbind.client.processing.threads-min=Minimum amount of threads in the thread pool to perform the network IO related to websocket and BOSH traffic. See also property 'xmpp.httpbind.worker.threads-min'.
system_property.httpbind.client.processing.threads=Maximum amount of threads in the thread pool to perform the network IO related to websocket and BOSH traffic. Note: Apart from threads that perform network IO configured in this class, the server also uses a thread pool for threads performing the processing of inbound packets (see property 'xmpp.httpbind.worker.threads'). BOSH installations expecting heavy loads may want to allocate additional threads to this worker pool to ensure timely delivery of inbound packets.
system_property.httpbind.client.processing.threads-timeout=Amount of time after which idle, surplus threads are removed from the thread pool to perform the network IO related to websocket and BOSH traffic. See also property 'xmpp.httpbind.worker.timeout'.
system_property.httpbind.client.cert.policy=The TLS 'mutual authentication' policy that is applied to the websocket and BOSH endpoints.
system_property.httpbind.forwarded.enabled=Enable / Disable parsing a 'X-Forwarded-For' style HTTP header of BOSH requests.
system_property.httpbind.forwarded.for.header=The HTTP header name for 'forwarded for'.
system_property.httpbind.forwarded.server.header=The HTTP header name for 'forwarded server'.
system_property.httpbind.forwarded.host.header=The HTTP header name for 'forwarded hosts'.
system_property.httpbind.forwarded.host.name=Sets a forced valued for the host header.
system_property.httpbind.CORS.enabled=Enable / Disable support for Cross-Origin Resource Sharing (CORS) headers in the BOSH endpoint.
system_property.httpbind.CORS.domains=The domain names that are accepted as values for the CORS 'Origin' header in the BOSH endpoint.
system_property.httpbind.CORS.methods=The HTTP methods that are accepted in requests to the BOSH endpoint.
system_property.httpbind.CORS.headers=The name of HTTP headers that are accepted in requests to the BOSH endpoint.
system_property.httpbind.CORS.max_age=How long the results of a preflight request (that is the information contained in the Access-Control-Allow-Methods and Access-Control-Allow-Headers headers) can be cached.
system_property.httpbind.CSP.enabled=Enable / Disable adding a 'Content-Security-Policy' HTTP header to the response to requests made against the BOSH endpoint.
system_property.httpbind.CSP.responsevalue=The header value when adding a 'Content-Security-Policy' HTTP header to the response to requests made against the BOSH endpoint.
system_property.httpbind.request.header.size=The maximum size in bytes of request headers in the BOSH endpoint. Larger headers will allow for more and/or larger cookies plus larger form content encoded in a URL. However, larger headers consume more memory and can make a server more vulnerable to denial of service attacks.
system_property.adminConsole.sessionTimeout=The maximum idle time of an HTTP session in the admin console.
system_property.xmpp.httpbind.client.maxpause=The maximum length of a temporary session pause that a BOSH client MAY request.
system_property.xmpp.httpbind.client.maxpause.ignore-invalid=Controls if BOSH client-provided 'pause' values that are invalid (higher than 'maxpause') are ignored or will cause the client to be disconnected.
system_property.xmpp.httpbind.client.requests.wait=Returns the longest time that Openfire is allowed to wait before responding to any request of a BOSH session. This enables the client to prevent its TCP connection from expiring due to inactivity, as well as to limit the delay before it discovers any network failure.
system_property.xmpp.httpbind.client.requests.polling=Openfire SHOULD include two additional attributes in the BOSH session creation response element, specifying the shortest allowable polling interval and the longest allowable inactivity period (both in seconds). Communication of these parameters enables the client to engage in appropriate behavior (e.g., not sending empty request elements more often than desired, and ensuring that the periods with no requests pending are never too long).
system_property.xmpp.httpbind.client.requests.max=Openfire MAY limit the number of simultaneous requests a BOSH client makes with the 'requests' attribute. The RECOMMENDED value is "2". Servers that only support polling behavior MUST prevent clients from making simultaneous requests by setting the 'requests' attribute to a value of "1" (however, polling is NOT RECOMMENDED). In any case, clients MUST NOT make more simultaneous requests than specified by the Openfire.
system_property.xmpp.httpbind.client.idle=Period of time a BOSH session has to be idle to be closed. Sending stanzas to the client is not considered as activity. We are only considering the connection active when the client sends some data or heartbeats (i.e. whitespaces) to the server. The reason for this is that sending data will fail if the connection is closed. And if the thread is blocked while sending data (because the socket is closed) then the clean up thread will close the socket anyway.
system_property.xmpp.httpbind.client.idle.polling=Period of time a BOSH polling session has to be idle to be closed. Sending stanzas to the client is not considered as activity. We are only considering the connection active when the client sends some data or heartbeats (i.e. whitespaces) to the server. The reason for this is that sending data will fail if the connection is closed. And if the thread is blocked while sending data (because the socket is closed) then the clean up thread will close the socket anyway.
system_property.xmpp.httpbind.worker.threads-min=Minimum amount of threads used to process incoming BOSH data. See also property 'httpbind.client.processing.threads-min'.
system_property.xmpp.httpbind.worker.threads=Maximum number of threads used to process incoming BOSH data. Defaults to the same amount of threads as what's used for non-BOSH/TCP-connected XMPP clients. Note: Apart from the processing threads configured in this class, the server also uses a thread pool to perform the network IO (see property 'httpbind.client.processing.threads'). BOSH installations expecting heavy loads may want to allocate additional threads to this worker pool to ensure timely delivery of inbound packets.
system_property.xmpp.httpbind.worker.timeout=Duration that unused, surplus threads that once processed BOSH data are kept alive. See also property 'httpbind.client.processing.threads-timeout'
system_property.xmpp.httpbind.worker.cleanupcheck=Interval in which a check is executed that will cleanup unused/inactive BOSH sessions.
system_property.xmpp.jmx.enabled=Enables / disables JMX support in Openfire
system_property.xmpp.jmx.secure=Controls if the JMX connector is configured to require Openfire admin credentials.
system_property.xmpp.jmx.port=Defines the TCP port number for the JMX connector.
system_property.xmpp.archivemanager.threadpool.size.core=The number of threads to keep in the thread pool that writes messages to the database, even if they are idle.
system_property.xmpp.archivemanager.threadpool.size.max=The maximum number of threads to allow in the thread pool that writes messages to the database.
system_property.xmpp.archivemanager.threadpool.keepalive=The number of threads in the thread pool that writes messages to the database is greater than the core, this is the maximum time that excess idle threads will wait for new tasks before terminating.
system_property.xmpp.client.roster.threadpool.size.core=The number of threads to keep in the thread pool that is used to invoke roster event listeners, even if they are idle.
system_property.xmpp.client.roster.threadpool.size.max=The maximum number of threads to allow in the thread pool that is used to invoke roster event listeners.
system_property.xmpp.client.roster.threadpool.keepalive=The number of threads in the thread pool that is used to invoke roster event listeners is greater than the core, this is the maximum time that excess idle threads will wait for new tasks before terminating.
system_property.provider.transfer.proxy.threadpool.size.core=The number of threads to keep in the thread pool that powers proxy (SOCKS5) connections, even if they are idle.
system_property.provider.transfer.proxy.threadpool.size.max=The maximum number of threads to allow in the thread pool that powers proxy (SOCKS5) connections.
system_property.provider.transfer.proxy.threadpool.keepalive=The number of threads in the thread pool that powers proxy (SOCKS5) connections is greater than the core, this is the maximum time that excess idle threads will wait for new tasks before terminating.
system_property.xmpp.pep.enabled=Enables / disables PEP support in Openfire.
system_property.xmpp.pep.threadpool.size.core=The number of threads to keep in the thread pool used to send PEP notifications, even if they are idle.
system_property.xmpp.pep.threadpool.size.max=The maximum number of threads to allow in the thread pool used to send PEP notifications.
system_property.xmpp.pep.threadpool.keepalive=The number of threads in the thread pool used to send PEP notifications is greater than the core, this is the maximum time that excess idle threads will wait for new tasks before terminating.
system_property.xmpp.taskengine.threadpool.size.core=The number of threads to keep in the thread pool that is used to execute tasks of Openfire's TaskEngine, even if they are idle.
system_property.xmpp.taskengine.threadpool.size.max=The maximum number of threads to allow in the thread pool that is used to execute tasks of Openfire's TaskEngine.
system_property.xmpp.taskengine.threadpool.keepalive=The number of threads in the thread pool that is used to execute tasks of Openfire's TaskEngine is greater than the core, this is the maximum time that excess idle threads will wait for new tasks before terminating.
system_property.xmpp.muc.allowpm.blockall=Toggles whether to block all packets from users or just messages if they do not have permission to send private messages.
system_property.abstractGroupProvider.shared.recursive=Toggles whether shared groups recursively resolve groups that they are shared with, or limit themselves to their immediate shared groups only.
system_property.xmpp.websocket.stream-substitution-enabled=Controls if 'stream' elements that are sent over websockets are renamed to 'open' and 'close' where appropriate. Useful to allow certain non-compliant clients (eg: Tsung) to connect.
system_property.xmpp.websocket.frame.ping.enabled=Periodically send WebSocket ping control frames on an idle WebSocket connection.
system_property.xmpp.websocket.frame.ping.interval=The maximum duration of inactivity that triggers a WebSocket ping control frame to be sent over an idle connection.
system_property.xmpp.component.backup-packet-delivery.enabled=Enable / disable backup delivery of stanzas to the XMPP server itself when a stanza failed to be delivered on a component connection. When disabled, stanzas that can not be delivered on the connection are discarded.
system_property.xmpp.multiplex.backup-packet-delivery.enabled=Enable / disable backup delivery of stanzas to other connections in the same connection manager when a stanza failed to be delivered on a multiplexer (connection manager) connection. When disabled, stanzas that can not be delivered on the connection are discarded.
system_property.xmpp.server.backup-packet-delivery.enabled=Enable / disable backup delivery of stanzas to the XMPP server itself when a stanza failed to be delivered on a server-to-server connection. When disabled, stanzas that can not be delivered on the connection are discarded.
system_property.xmpp.muc.occupants.clustertask.non-blocking=Controls if blocking or non-blocking tasks are used when synchronizing MUC occupant data over an Openfire cluster.
system_property.xmpp.muc.vcard.enabled=Controls if MUC occupants can request vCards / avatars.
system_property.xmpp.muc.vcard.presence-advertising.enabled=Controls if avatar updates are advertised through presence updates.
system_property.xmpp.xmlutil.parser.core-pool-size=The number of threads to keep in the SAX Reader pool, even if they are idle.
system_property.xmpp.xmlutil.parser.maximum-pool-size=The maximum number of threads to allow in the SAX Reader pool.
system_property.xmpp.xmlutil.parser.keep_alive_time=When the number of threads in the SAX reader pool is greater than the core, this is the maximum time that excess idle threads will wait for new tasks before terminating.
system_property.xmpp.client.backup-packet-delivery.enabled=Enable / disable backup delivery of stanzas to the 'offline message store' of the corresponding user when a stanza failed to be delivered on a client connection. When disabled, stanzas that can not be delivered on the connection are discarded.
system_property.xmpp.client.preauth.timeout=Time after which connected client connections that never authenticated can be disconnected.
system_property.xmpp.command.limit=The maximum allowed simultaneous command sessions per user.
system_property.xmpp.command.timeout=The maximum allowed duration of a command session (all stages of a command need to have provided by the user within this time).
system_property.xmpp.server.connection-attempt-delay=A fixed delay for how long to wait before starting the next connection attempt, as defined in section 5 of RFC 8305 "Happy Eyeballs Version 2: Better Connectivity Using Concurrency".
system_property.xmpp.server.resolution-delay=The time to wait for a response for the 'preferred IP family' after receiving a response for another family, as defined in section 3 of RFC 8305 "Happy Eyeballs Version 2: Better Connectivity Using Concurrency".
system_property.xmpp.server.resolution-timeout=The maximum amount of time to wait for successful resolution of a host of a target domain.
system_property.xmpp.server.connection-max-workers=The maximum amount of worker threads attempting to set up a socket connection to a target remote XMPP domain. A value of '1' will effectively make 'Happy Eyeballs' impossible (as that requires concurrent connection attempts).
system_property.ssl.certificates.expirycheck.service-enabled=Enables or disabled the period check for expiry of Openfire's TLS certificates.
system_property.ssl.certificates.expirycheck.notify-admins=Determines if the administrators receive a message when an (almost) expired TLS certificate is detected.
system_property.ssl.certificates.expirycheck.frequency=How often to check for (nearly) expired TLS certificates.
system_property.ssl.certificates.expirycheck.warning-period=How long (in hours) before a TLS certificate will expire for a warning is to be sent out to admins.
# Server properties Page
server.properties.title=System Properties
server.properties.info=Below is a list of the system properties. Values for encrypted and sensitive fields are \
hidden. Long property names and values are clipped. Hold your mouse over the property name to see \
the full value or to see both the full name and value, click the edit icon next to the property.
server.properties.system=System Properties
server.properties.error=Error -- creating the property failed, see below.
server.properties.saved=Property saved successfully.
server.properties.deleted=Property deleted successfully.
server.properties.edit_property=Use the form below this table to edit the property value.
server.properties.error_deleting=Error deleting the property.
server.properties.no_property=No properties set.
server.properties.name=Property Name
server.properties.value=Property Value
server.properties.description=Description
server.properties.default=Default Value
server.properties.search_all=All
server.properties.search_none=None
server.properties.default.unknown=Unknown
server.properties.default.search_unchanged=Unchanged
server.properties.default.search_changed=Changed
server.properties.plugin=Plugin
server.properties.dynamic=Dynamic
server.properties.setbyuser=Set by User
server.properties.dynamic.search.true=Yes
server.properties.dynamic.search.false=No
server.properties.dynamic.search.restart=Needed
server.properties.setbyuser.search.true=Yes
server.properties.setbyuser.search.false=No
server.properties.total=Total number of properties
server.properties.filtered=Filtered properties
server.properties.per-page=Properties per page
server.properties.edit=Edit
server.properties.alt_dynamic=Dynamic
server.properties.alt_static=A restart will be required if this property changes
server.properties.alt_restart-required=This property has changed and a restart is required
server.properties.alt_setbyuser=This property is explicitly set by user
server.properties.alt_default=This property value is a default value
server.properties.alt_edit=Click to edit this property
server.properties.alt_delete=Click to delete this property
server.properties.edit_property_title=Edit property
server.properties.new_property=Add new property
server.properties.enter_property_name=Please enter a valid property name.
server.properties.enter_property_value=Please enter a property value.
server.properties.max_character=1000 character max.
server.properties.encryption=Property Encryption
server.properties.encrypted=Property encrypted successfully.
server.properties.encrypt=Encrypt
server.properties.alt_encrypt=Click to encrypt this property
server.properties.alt_encrypted=Property is encrypted
server.properties.encrypt_property_true=Encrypt this property value
server.properties.encrypt_property_false=Do not encrypt this property value
server.properties.delete_confirm=Are you sure you want to delete this property?
server.properties.encrypt_confirm=Are you sure you want to encrypt this property?
# Server props Page
server.props.title=Edit Server Properties
server.props.info=Use the form below to edit server properties.
server.props.update.norestart=Server properties updated successfully
server.props.update=Server properties updated successfully. You'll need to
server.props.update2=the server to have the changes take effect (see
server.props.property=Server Properties
server.props.name=Server Host Name (FQDN):
server.props.valid_hostname=Please enter a valid server host name or
server.props.valid_hostname1=restore the default
server.props.server_port=Server-to-Server Port:
server.props.server_ssl_port=Server-to-Server TLS Port:
server.props.component_port=Component Port:
server.props.port=Client Port:
server.props.valid_port=Please enter a valid port number or
server.props.valid_port1=restore the default
server.props.error_port=Error -- this port and the TLS port can not be equal.
server.props.ssl_port=Client TLS Port:
server.props.ssl=TLS Enabled:
server.props.enable=Enabled
server.props.disable=Disabled
server.props.ssl_valid=Please enter a valid TLS port number or
server.props.ssl_valid1=restore the default
server.props.admin_port=Admin Console Port:
server.props.admin_secure_port=Secure Admin Console Port:
server.props.jmx_enabled=JMX Enabled:
server.props.jmx_secure=JMX Require Admin User:
server.props.jmx_port=JMX Connector Port:
server.props.jmx_valid=Please enter a valid port number or
server.props.jmx_valid1=restore the default
# Server stopped Page
server.stopped.title_restarting=Restarting Server
server.stopped.title_stopped=Server stopped
server.stopped.admin_console=Admin Console
server.stopped.restarted=The server is being restarted.To continue:
server.stopped.wait_time=Wait a few seconds until the server has been restarted.
server.stopped.login_console=Login to the admin console
server.stopped.stop=The server is being stopped.To continue:
server.stopped.wait_restarted=Wait a few seconds and then
server.stopped.wait_restarted2=the server.
# Server-to-server settings Page
server2server.settings.title=Server to Server Settings
server2server.settings.info=Use the forms below to configure settings for connections to remote \
servers. You can also {0}view{1} the current remote server connections.
server2server.settings.enabled.legend=Service Enabled
server2server.settings.boxtitle=Plain-text (with STARTTLS) connections
server2server.settings.boxinfo=Openfire can accept plain-text connections, which, depending on the policy that is configured here, can be upgraded to encrypted connections (using the STARTTLS protocol).
server2server.settings.label_disable=Disabled
server2server.settings.label_disable_info=Remote servers are not allowed to exchange packets with this server.
server2server.settings.label_enable=Enabled
server2server.settings.label_enable_info=Remote servers can exchange packets with this server on port
server2server.settings.label_port=Port number
server2server.settings.valid.port=Please enter a valid port.
server2server.settings.update=Idle connections settings updated successfully.
server2server.settings.valid.idle_minutes=Please enter a valid number for max idle minutes.
server2server.settings.valid.domain=Please specify the domain of the remote server.
server2server.settings.valid.remotePort=Please enter a valid port number.
server2server.settings.close_settings=Idle Connections Settings
server2server.settings.never_close=Never close idle connections.
server2server.settings.close_session=Close connections after they have been idle for
server2server.settings.allowed=Allowed to Connect
server2server.settings.anyone=Anyone
server2server.settings.anyone_info=Any remote server is allowed to connect to this server. Use the \
table below to override the default settings.
server2server.settings.whitelist=White List
server2server.settings.whitelist_info=Only some remote servers are allowed to connect to this \
server. Use the table below to define the allowed remote servers and their settings.
server2server.settings.disallowed=Not Allowed to Connect
server2server.settings.disallowed.info=The remote servers listed in the following table will not \
be able to connect to this server. Use the form below to block new remote servers from \
connecting to this server.
server2server.settings.domain=Domain
server2server.settings.remotePort=Port
server2server.settings.empty_list=No remote servers
server2server.settings.allow=Add Server
server2server.settings.block=Block Server
server2server.settings.confirm_delete=Are you sure you want to remove this remote server?
server2server.settings.confirm.updated=Remote server information updated successfully.
server2server.settings.confirm.allowed=Remote server is now allowed to connect to the server.
server2server.settings.confirm.blocked=Remote server is now not allowed to connect to the server.
server2server.settings.confirm.deleted=Remote server information was deleted.
server2server.settings.ratelimit.title=New Connection Rate Limiting
server2server.settings.ratelimit.enable=Enable rate limiting for new connections.
server2server.settings.ratelimit.info=Configure how quickly new server-to-server connections can be accepted.
server2server.settings.ratelimit.permits=Permits per second
server2server.settings.ratelimit.max_burst=Maximum burst
server2server.settings.ratelimit.permits.invalid=Permits per second must be a positive whole number.
server2server.settings.ratelimit.max_burst.invalid=Maximum burst must be a positive whole number.
server2server.settings.testing.title=Server to Server Test
server2server.settings.testing.info=This page can be used to test the connectivity to a remote XMPP domain. Please be \
aware that during the test, any pre-existing connection to the remote domain will be disconnected. This might \
result in temporary loss of functionality for some of your users.
server2server.settings.testing.error=An unexpected error occurred while trying to perform the test.
server2server.settings.testing.domain-invalid=The provided XMPP domain value is invalid.
server2server.settings.testing.boxtitle=Server to Server Test
server2server.settings.testing.domain=XMPP domain
server2server.settings.testing.xmpp=XMPP
server2server.settings.testing.certificates=Certs
server2server.settings.testing.logs=Logs
# External component settings Page
component.settings.title=External Component Settings
component.settings.info=XMPP allows trusted components to connect to the server to provide new \
services. Components will use a subdomain to provide their services. You can also \
{0}view the external components{1} that are currently connected to this server.
component.settings.enabled.legend=Service Enabled
component.settings.label_disable=Disabled
component.settings.label_disable_info=External components are not allowed to connect to this server.
component.settings.label_enable=Enabled
component.settings.label_enable_info=External components can connect to this server.
component.settings.plaintext.boxtitle=Plain-text (with STARTTLS) connections
component.settings.plaintext.info=Openfire can accept plain-text connections, which, depending on the policy that is configured here, can be upgraded to encrypted connections (using the STARTTLS protocol).
component.settings.plaintext.label_enable=Enabled
component.settings.directtls.boxtitle=Encrypted (Direct TLS) connections
component.settings.directtls.info=Connections of this type are established using encryption immediately (as opposed to using STARTTLS). This type of connectivity is commonly referred to as Direct TLS.
component.settings.directtls.label_enable=Enabled
component.settings.port=Port:
component.settings.valid.port=Please enter a valid port.
component.settings.defaultSecret=Default shared secret:
component.settings.valid.defaultSecret=Please specify a default secret key.
component.settings.valid.subdomain=Please specify the subdomain of the component.
component.settings.valid.secret=Please specify the secret key of the component.
component.settings.modification.denied=Requested operation is not allowed.
component.settings.allowed=Allowed to Connect
component.settings.anyone=Anyone
component.settings.anyone_info=Any component is allowed to connect to this server. Use the table \
below to override the default shared secret.
component.settings.whitelist=Whitelist
component.settings.whitelist_info=Only some components are allowed to connect to this server. Use \
the table below to define the allowed components and their shared secret keys.
component.settings.disallowed=Not Allowed to Connect
component.settings.disallowed.info=The components listed in the following table will not be able \
to connect to this server. Use the form below to block new components from connecting to \
this server.
component.settings.subdomain=Subdomain
component.settings.secret=Shared secret
component.settings.empty_list=No components
component.settings.allow=Add Component
component.settings.block=Block Component
component.settings.confirm_delete=Are you sure you want to remove this component?
component.settings.confirm.updated=Component information updated successfully.
component.settings.confirm.allowed=Component is now allowed to connect to the server.
component.settings.confirm.blocked=Component is now not allowed to connect to the server.
component.settings.confirm.deleted=Component information was deleted.
# Advanced connection settings page
connection.advanced.settings.error.connectiontype=The connection type is unrecognized.
connection.advanced.settings.error.connectionmode=The connection mode is unrecognized.
connection.advanced.settings.info=The configuration on this page applies to {0} connections.
connection.advanced.settings.tcp.boxtitle=TCP Settings
connection.advanced.settings.tcp.label_enable=Enabled
connection.advanced.settings.tcp.label_readbuffer=Read buffer
connection.advanced.settings.tcp.label_readbuffer_suffix=(in bytes - empty for unlimited size)
connection.advanced.settings.starttls.boxtitle=STARTTLS policy
connection.advanced.settings.starttls.label_disabled=Disabled - Encryption is not allowed.
connection.advanced.settings.starttls.label_optional=Optional - Encryption may be used, but is not required.
connection.advanced.settings.starttls.label_required=Required - Connections cannot be established unless they are encrypted.
connection.advanced.settings.clientauth.boxtitle=Mutual Authentication
connection.advanced.settings.clientauth.info=In addition to requiring peers to use encryption (which will force them to verify the security certificates of this Openfire instance) an additional level of security can be enabled. With this option, the server can be configured to verify certificates that are to be provided by the peers. This is commonly referred to as 'mutual authentication'.
connection.advanced.settings.clientauth.label_disabled=Disabled - Peer certificates are not verified.
connection.advanced.settings.clientauth.label_wanted=Wanted - Peer certificates are verified, but only when they are presented by the peer.
connection.advanced.settings.clientauth.label_needed=Needed - A connection cannot be established if the peer does not present a valid certificate.
connection.advanced.settings.clientauth.label_strict_cert_validation=Treat invalid TLS certificates as fatal (do not attempt other, possibly weaker, forms methods of authentication).
connection.advanced.settings.certchain.ocsp.warning=Your server is configured with the Java security property ocsp.enable=false which disables client-driven OCSP certificate revocation checking. While OCSP stapling validation and CRL checking remain active, Openfire will not perform direct OCSP requests to verify certificate status.
connection.advanced.settings.certchain.boxtitle=Certificate chain checking
connection.advanced.settings.certchain.info=These options configure some aspects of the verification/validation of the certificates that are presented by peers while setting up encrypted connections.
connection.advanced.settings.certchain.label_selfsigned=Allow peer certificates to be self-signed.
connection.advanced.settings.certchain.label_validity=Verify that the certificate is currently valid (based on the 'notBefore' and 'notAfter' values of the certificate).
connection.advanced.settings.certchain.label_revocation=Verify that certificates have not been revoked (by checking Certificate Revocation Lists and OCSP)
connection.advanced.settings.protocols.boxtitle=Encryption Protocols
connection.advanced.settings.protocols.info=These are all encryption protocols that this instance of Openfire supports. Those with a checked box are enabled, and can be used to establish an encrypted connection. Deselecting all values will cause a default to be restored.
connection.advanced.settings.protocols.sslv2hello.info=When setting up a new encrypted connection some encryption protocols allow you to have part of the handshake (the 'hello') encapsulated in an SSLv2 format. The SSLv2Hello option below controls this encapsulation. When enabled, incoming data may use the SSLv2 handshake format (but SSLv2 itself will never be allowed). When disabled, all incoming data must conform to the SSLv3/TLSv1 handshake format. All outgoing data (which applies to outbound server-to-server connections) will always conform to the SSLv3/TLSv1 format irrespective of this setting.
connection.advanced.settings.ciphersuites.boxtitle=Encryption Cipher Suites
connection.advanced.settings.ciphersuites.info=These are all encryption cipher suites that this instance of Openfire supports. Those in the list on the left are enabled, and can be used to establish an encrypted connection. Removing all values from that list will cause a default to be restored.
connection.advanced.settings.ciphersuites.label_enable=Enabled
connection.advanced.settings.ciphersuites.label_supported=Supported
connection.advanced.settings.misc.boxtitle=Miscellaneous settings
connection.advanced.settings.misc.label_workers=Maximum worker threads
# Session conflict Page
session.conflict.title=Conflict Policy
session.conflict.update=Settings updated successfully.
session.conflict.info=XMPP allows multiple logins to the same user account by assigning a unique \
"resource name" to each connection. If a connection requests a resource name that is already \
in use, the server must decide how to handle the conflict. The options on this page allow you \
to determine if the server always kicks off existing connections, never kicks off existing \
connections, or sets the number of login attempts that should be rejected before kicking off \
an existing connection. The last option allows users to receive an error when logging in that \
allows them to request a different resource name.
session.conflict.policy=Set Conflict Policy
session.conflict.always_kick=Always kick
session.conflict.always_kick_info=If there is a resource conflict, immediately kick the other resource.
session.conflict.never_kick=Never kick
session.conflict.never_kick_info=If there is a resource conflict, don't allow the new resource to log in.
session.conflict.allow_one=Allow one login attempt
session.conflict.resource_conflict=If there is a resource conflict, report an error one time but don't \
kick the existing connection.
session.conflict.kick_value=Assign kick value
session.conflict.kick_value_info=Specify the number of login attempts allowed before conflicting \
resources are kicked. You must specify a number greater than one.
session.conflict.enter_value=Please enter a value greater than 1.
# Session details Page
session.details.title=Session Details
session.details.info=Below are session details for the session {0}. If the user {1} has multiple \
sessions open, they will appear below.
session.details.session_id=Session ID:
session.details.username=Username & Resource:
session.details.anonymous=Anonymous
session.details.status=Status
session.details.priority=Priority
session.details.close=Closed
session.details.connect=Connected
session.details.streaming=Streaming
session.details.authenticated=Authenticated
session.details.tls_version=TLS Version
session.details.cipher=Cipher Suite
session.details.presence=Presence
session.details.away=Away
session.details.chat_available=Available to Chat
session.details.not_disturb=Do Not Disturb
session.details.online=Online
session.details.extended=Extended Away
session.details.unknown=Unknown/Not Recognized
session.details.session_created=Session Created:
session.details.last_active=Session Last Active:
session.details.statistics=Session Statistics:
session.details.received-and-transmitted=Packets Received/Sent:
session.details.received=Packets Received
session.details.received-abbreviation=RX
session.details.transmitted=Packets Transmitted
session.details.transmitted-abbreviation=TX
session.details.hostname=Client IP / Hostname:
session.details.multiple_session=Multiple User Sessions
session.details.name=Name
session.details.resource=Resource
session.details.version=Client Version
session.details.if_presence=Presence (if authenticated)
session.details.clientip=Client IP
session.details.close_connect=Close Connection
session.details.session_detail=Current session details above.
session.details.back_button=Back to Summary
session.details.node=Cluster Node
session.details.local=Local
session.details.remote=Remote
session.details.sm-status=Stream Management
session.details.sm-detached=Detached
session.details.sm-resume=Enabled (with resume)
session.details.sm-enabled=Enabled (no resume)
session.details.sm-disabled=Disabled
session.details.csi-status=Client State Indication
session.details.csi-active=Active
session.details.csi-inactive=Inactive
session.details.csi-delayed-stanzas=delayed stanzas
session.details.connection=Connection Details
session.details.connection-type=Connection Type
session.details.connection-local-port=Local port
session.details.software_version=Software Version
session.details.cc-status=Message Carbons
session.details.cc-enabled=Enabled
session.details.cc-disabled=Disabled
session.details.anon-status=Using Anonymous Authentication
session.details.anon-true=Yes
session.details.anon-false=No
session.details.sasl-mechanism=SASL Mechanism
session.details.flomr-status=Flexible Offline Message Retrieval
session.details.flomr-enabled=Enabled
session.details.flomr-disabled=Disabled
session.details.entity_capabilities=Entity Capabilities (CAPS) information
session.details.entity_capabilities.identity=Identity
session.details.entity_capabilities.feature=Feature
session.details.hide-extended=Show Less Details
session.details.show-extended=Show More Details
session.details.security=Security
session.details.features=Features & Functionality
# Session row Page
session.row.click=Click for more info...
session.row.click_ssl=User is connected via TLS
session.row.click_kill_session=Click to kill session...
session.row.confirm_close=Are you sure you want to close this connection?
# Session summary Page
session.summary.title=Client Sessions
session.summary.close=Client session closed successfully.
session.summary.active=Active Client Sessions
session.summary.filtered_session_count=Filtered sessions
session.summary.not_session=No Client Sessions
session.summary.last_update=List last updated
session.summary.sessions_per_page=Sessions per page
session.summary.column-config=Configure columns...
# Session summary config page
session.summary.config.intro=The form below can be used to configure the columns that are visible on the Session Summary page.
session.summary.config.title=Select columns to show
# Server Session summary Page
server.session.summary.title=Server Sessions
server.session.summary.close=Session closed successfully.
server.session.summary.active=Connected Remote Servers
server.session.summary.info=Below is a list of sessions to remote servers. \
Server to server communication requires two independent connections: one \
is used for receiving packets and the other for sending packets. You can also modify \
{0}remote server settings{1}.
server.session.summary.not_session=No Sessions
server.session.summary.last_update=List last updated
server.session.label.host=Host
server.session.label.connection=Connection
server.session.label.protocol=Protocol
server.session.label.creation=Creation Date
server.session.label.last_active=Last Activity
server.session.label.close_connect=Close Connection
server.session.connection.incoming=Incoming
server.session.connection.outgoing=Outgoing
server.session.connection.both=Both
server.session.summary.sessions_per_page=Sessions per page
# Server Session details Page
server.session.details.domain.title=Remote XMPP domain
server.session.details.title=Remote Server Connections Details
server.session.details.info=Below are details about the sessions with the remote domain {0}.
server.session.details.domainname=Remote XMPP domain name:
server.session.details.hostname=Remote server IP / Hostname:
server.session.details.incoming_session=Incoming Session Details
server.session.details.streamid=Stream ID
server.session.details.authentication=Authentication
server.session.details.dialback=Dialback
server.session.details.tlsauth=SASL EXTERNAL
server.session.details.unknown=(unknown)
server.session.details.tls_version=TLS Version
server.session.details.cipher=Cipher Suite
server.session.details.incoming_statistics=Packets RX
server.session.details.outgoing_session=Outgoing Session Details
server.session.details.outgoing_statistics=Packets TX
server.session.details.node=Cluster Node
server.session.details.local=Local
server.session.details.remote=Remote
# External Component Session summary Page
component.session.summary.title=Component Sessions
component.session.summary.close=Session closed successfully.
component.session.summary.active=Connected External Components
component.session.summary.info=Below is a list of connected external components to this server. \
You can also modify the {0}external components settings{1}.
component.session.summary.not_session=No Sessions
component.session.summary.last_update=List last updated
component.session.label.domain=Domain
component.session.label.name=Name
component.session.label.category=Category
component.session.label.type=Type
component.session.label.node=Cluster Node
component.session.label.creation=Creation Date
component.session.label.last_active=Last Activity
component.session.label.close_connect=Close Connection
component.session.summary.sessions_per_page=Sessions per page
component.session.local=Local
component.session.remote=Remote
# External Component Session details page
component.session.details.title=External Component Connection Details
component.session.details.info=Below are details about the session with the external component {0}.
component.session.details.tls_version=TLS Version
component.session.details.cipher=Cipher Suite
# General Setup
setup.title=Setup
setup.invalid_session=A failure occurred while fetching your session from the server. This is typically a cookie issue. Please either clear all cookies for this domain or try this URL again from an incognito browser session.
# Setup environment check
setup.env.check.error=Error: Can not proceed with
setup.env.check.error_info=Your current installation fails to meet minimum server requirements - please see the checklist below:
setup.env.check.jdk=At least JRE 11
setup.env.check.servlet=Servlet 2.3 Support
setup.env.check.jsp=JSP 1.2 Support
setup.env.check.class=Classes
setup.env.check.jive=Openfire Home found
setup.env.check.not_home=Home not found. Define system property "openfireHome" or create and add the openfire_init.xml file to the classpath
setup.env.check.doc=Please read the installation documentation and try setting up your environment again. After making changes, restart your appserver and load this page again.
setup.env.check.config_found=Successfully loaded configuration file {0}
setup.env.check.config_not_loaded=Unable to load configuration file {0}. Check if the file exists, and if Openfire has read and write access to it.
# Setup admin settings Page
setup.admin.settings.account=Administrator Account
setup.admin.settings.info=Enter settings for the system administrator account (username of "admin") \
below. It is important to choose a password for the account that cannot be easily guessed -- \
for example, at least eight characters long and containing a mix of letters and numbers. You \
can skip this step if you have already setup your admin account. if you skip this step during \
the new installation, the default password would be "admin".
setup.admin.settings.ldap.info=Choose one or more users from your LDAP directory to be administrators by \
entering their usernames.
setup.admin.settings.ldap.info.group=Alternatively, provide the name of one of the groups from your LDAP \
directory to make all of its members an administrator of Openfire.
setup.admin.settings.error=There were errors when updating the admin account. Please see below.
setup.admin.settings.username-error=No username was provided or the specified username was not found.
setup.admin.settings.current_password=Current Password:
setup.admin.settings.current_password_description=If this is a new installation, the current \
password will be 'admin'.
setup.admin.settings.current_password_error=Please enter the correct current password.
setup.admin.settings.email=Admin Email Address:
setup.admin.settings.email_description=A valid email address for the admin account.
setup.admin.settings.email_error=Please enter a valid email address.
setup.admin.settings.new_password=New Password:
setup.admin.settings.valid_new_password=Please enter a valid new password.
setup.admin.settings.not_new_password=The new passwords do not match.
setup.admin.settings.confirm_password=Confirm Password:
setup.admin.settings.valid_confirm=Please enter a valid new confirmation password.
setup.admin.settings.skip_this_step=Skip This Step
setup.admin.settings.add.administrator = Add Administrator
setup.admin.settings.administrator = Administrator
setup.admin.settings.remove = Remove
setup.admin.settings.is-user = The value provided above is an LDAP user.
setup.admin.settings.is-group = The value provided above is an LDAP group name.
setup.admin.settings.test.title-desc=Administrator Settings
setup.admin.settings.test.status-success=Status: Authentication Successful!
setup.admin.settings.test.status-success.detail=Specified username and password are valid. Close \
this test panel to continue.
setup.admin.settings.test.status-error=Status: Authentication Failed
setup.admin.settings.test.error-user=Username not found.
setup.admin.settings.test.error-password=Password is incorrect.
# Setup completed Page
setup.completed.setup=Setup
setup.completed.jive=Ignite Realtime
setup.completed.run=Setup Already Run
setup.completed.run_info=It appears setup has already been run. To administer your server, \
please use the
setup.completed.run_info1=Admin Console
setup.completed.run_info2=To re-run setup, you need to stop your appserver, delete the \
"setup" property from the openfire.xml file, restart the server, then reload \
the setup tool.
# Setup datasource jndi Page
setup.datasource.jndi.setting=Datasource Settings - JNDI Connection
setup.datasource.jndi.setting_info=Choose a JNDI datasource below to connect to the {0} \
database. The name varies between application servers, but it is generally of the \
form: {1}. Please consult your application server's documentation for more information.
setup.datasource.jndi.name=JNDI Datasource Name:
setup.datasource.jndi.custom=Custom:
setup.datasource.jndi.valid_name=Please enter a valid JNDI name.
setup.datasource.jndi.note=Note, it might take between 30-60 seconds to connect to your database.
# Setup datasource settings Page
setup.datasource.settings.title=Database Settings
setup.datasource.settings.info=Choose how you would like to connect to the {0} database.
setup.datasource.settings.connect=Standard Database Connection
setup.datasource.settings.connect_info=Use an external database with the built-in connection pool.
setup.datasource.settings.jndi=JNDI Datasource
setup.datasource.settings.jndi_info=Use a datasource defined by your application server via JNDI.
setup.datasource.settings.embedded=Embedded Database
setup.datasource.settings.embedded_info=Use an embedded database, powered by HSQLDB. This option \
requires no external database configuration and is an easy way to get up and running quickly. \
However, it does not offer the same level of performance as an external database.
# Setup datasource standard Page
setup.datasource.standard.title=Database Settings - Standard Connection
setup.datasource.standard.label=Database Driver Presets
setup.datasource.standard.info=Specify a JDBC driver and connection properties to connect to your \
database. If you need more information about this process please see the database documentation \
distributed with
setup.datasource.standard.info2=Note:
setup.datasource.standard.info3=Database scripts for most popular databases are included in the \
server distribution at
setup.datasource.standard.failed_connect=Failed to establish a database connection - please see specific \
errors listed below.
setup.datasource.standard.pick_database=Pick Database...
setup.datasource.standard.jdbc=JDBC Driver Class:
setup.datasource.standard.jdbc_info=The valid classname of your JDBC driver, ie: com.mydatabase.driver.MyDriver.
setup.datasource.standard.url=Database URL:
setup.datasource.standard.valid_url=The valid URL used to connect to your database, ie: jdbc:mysql://host:port/database
setup.datasource.standard.username=Username:
setup.datasource.standard.username_info=The user used to connect to your database - note, this may not be \
required and can be left blank.
setup.datasource.standard.password=Password:
setup.datasource.standard.password_info=The password for the user account used for this database - note, \
this may not be required and can be left blank.
setup.datasource.standard.connect=Connections:
setup.datasource.standard.min=Minimum:
setup.datasource.standard.max=Maximum:
setup.datasource.standard.pool=The minimum and maximum number of database connections the \
connection pool should maintain.
setup.datasource.standard.min_connections=Minimum Connections:
setup.datasource.standard.max_connections=Maximum Connections:
setup.datasource.standard.timeout=Connection Timeout:
setup.datasource.standard.timeout.days=Days
setup.datasource.standard.timeout_info=The time (in days) before connections in the connection \
pool are recycled.
setup.datasource.standard.note=Note, it might take between 30-60 seconds to connect to your database.
# Profile settings page
setup.profile.title=Profile Settings
setup.profile.description=Choose the user and group system to use with the server.
setup.profile.default=Default
setup.profile.default_description=Store users and groups in the server database. This is the \
best option for simple deployments.
setup.profile.default.scramOnly=Only Hashed Passwords
setup.profile.default.scramOnly_description=Store only non-reversible hashes of passwords in the database. \
This only supports PLAIN and SCRAM-SHA-1 capable clients.
setup.profile.ldap=Directory Server (LDAP)
setup.profile.ldap_description=Integrate with a directory server such as Active Directory or \
OpenLDAP using the LDAP protocol. Users and groups are stored in the directory and treated \
as read-only.
# Setup LDAP pages
setup.ldap.title=Profile Settings - Directory Server
setup.ldap.profile=Profile Settings
setup.ldap.connection_settings=Connection Settings
setup.ldap.user_mapping=User Mapping
setup.ldap.group_mapping=Group Mapping
setup.ldap.step_one=Step 1 of 3
setup.ldap.step_two=Step 2 of 3
setup.ldap.step_three=Step 3 of 3
setup.ldap.continue=Save & Continue
setup.ldap.test=Test Settings
setup.ldap.advanced=Advanced Settings
setup.ldap.first-match-description=This value also accepts the following format: (|({givenName})({displayName})({cn})) which will cause the first non-empty matching field to be used for this field.
setup.ldap.server.description=Configure connection settings for your LDAP directory below. All \
fields are required; if you need additional information about a field, hover your mouse over \
the corresponding help icon.
setup.ldap.server.ldap_server=LDAP Server
setup.ldap.server.type=Server Type
setup.ldap.server.type_select=--Select directory server type--
setup.ldap.server.type_other=Other or Unknown
setup.ldap.server.type_help=The type of directory server you are connecting to.
setup.ldap.plaintext=Your current settings mean user credentials will be passed in plain text between Openfire and your \
LDAP server. You should either use LDAPS or enable StartTLS for LDAP.
setup.ldap.server.details=Details of the server you are connecting to
setup.ldap.server.protocol=Protocol
setup.ldap.server.protocol_help=LDAPS uses TLS to encrypt traffic so is generally preferred over LDAP.
setup.ldap.server.host=Host
setup.ldap.server.host_help=LDAP server host name; e.g. ldap.example.com, etc.
setup.ldap.server.host_error=Enter a valid LDAP server host name.
setup.ldap.server.port=Port
setup.ldap.server.port_help=LDAP server port number. The default value is 389 for LDAP or 636 for LDAPS.
setup.ldap.server.port_error=Enter a valid LDAP server port number.
setup.ldap.server.basedn=Base DN
setup.ldap.server.basedn_help=The starting DN that contains all user accounts. The entire subtree \
under the base DN will be searched for user accounts (unless subtree searching is disabled).
setup.ldap.server.basedn_error=Enter a valid LDAP base DN.
setup.ldap.server.alternatebasedn=Alternate Base DN
setup.ldap.server.alternatebasedn_help=Provides data that complements that of the Base DN.
setup.ldap.server.alternatebasedn_error=Enter a valid LDAP alternate base DN (or leave it empty).
setup.ldap.server.auth=Authentication
setup.ldap.server.admindn=Administrator DN
setup.ldap.server.admindn_help=The full DN of a directory administrator. All directory operations will be \
performed with this account. The admin must be able to perform searches and load user records. \
The user does not need to be able to make changes to the directory, as the server treats the \
directory as read-only. If this property is not set, an anonymous login to the server will be attempted.
setup.ldap.server.password=Password
setup.ldap.server.password_help=The password for the directory administrator.
setup.ldap.server.connection_pool=Use Connection Pool
setup.ldap.server.connection_pool_help=Connection Pooling. Default is 'Yes'
setup.ldap.server.starttls=Use StartTLS
setup.ldap.server.starttls_help=Enable StartTLS connections to your LDAP server, default port is usually 389
setup.ldap.server.debug=Enable Debug
setup.ldap.server.debug_help=Write trace information about LDAP connections to System.out
setup.ldap.server.referral=Follow Referrals
setup.ldap.server.referral_help=Automatically follow LDAP referrals when found
setup.ldap.server.alias_dereference=Dereference Aliases
setup.ldap.server.alias_dereference_help=Automatically dereference LDAP aliases when found
setup.ldap.server.test.error-auth=Error authenticating with the LDAP server. Check supplied credentials.
setup.ldap.server.test.error-connection=Error connecting to the LDAP server. Ensure that the directory \
server is running at the specified host name and port and that a firewall is not blocking access \
to the server.
setup.ldap.server.test.error-unknownhost=Unknown host address.
setup.ldap.server.test.invalid-name=Invalid DN syntax or naming violation.
setup.ldap.server.test.name-not-found=Error verifying base DN. Verify that the value is correct.
setup.ldap.server.test.close=Close
setup.ldap.server.test.title=Test
setup.ldap.server.test.title-desc=Connection Settings
setup.ldap.server.test.status-success=Status: Success!
setup.ldap.server.test.status-success.detail=A connection was successfully established to the LDAP \
server using the settings above. Close this test panel and continue to the next step.
setup.ldap.server.test.status-error=Status: Error
setup.ldap.server.test.stacktrace=Error details
setup.ldap.user.description=Configure how the server finds and loads users from your LDAP directory. \
If you need additional information about a field, hover your mouse over the corresponding help icon.
setup.ldap.user.username_field=Username Field
setup.ldap.user.username_field_description=The field name that the username lookups will be \
performed on. If this property is not set, the default value is uid. Active Directory \
users should try the default value sAMAccountName.
setup.ldap.user.username_field_error=Enter a valid username field.
setup.ldap.user.search_fields=Search Fields
setup.ldap.user.search_fields_description=The LDAP fields that will be used for user searches. It \
is not recommended that you set a value for this field unless the default search fields do not \
work for you (username, name, and email fields). An example search value is \
"Username/uid,Name/cname". That searches the uid and cname fields in the directory and \
labels them as "Username" and "Name" in the search UI. You can add as many \
fields as you would like using comma-delimited "DisplayName/Field" pairs. You should \
ensure that any fields used for searching are properly indexed so that searches return quickly.
setup.ldap.user.user_filter=User Filter
setup.ldap.user.user_filter_description=An optional user filter to append to the default filter \
when loading users. The default user filter is created using the attribute specified by \
the username field. For example, if the username field is "uid", then the default \
user filter would be "(uid={0})" where {0} is dynamically replaced with the username \
being searched for.
setup.ldap.user.vcard.mapping=User Profiles (vCard)
setup.ldap.user.vcard.description=Use the form below to specify the LDAP fields that match the profile \
fields. Fields that are left empty will not be mapped. Values enclosed in {} will be replaced with \
actual LDAP content.
setup.ldap.user.vcard.label1=Profile Field
setup.ldap.user.vcard.label2=Value
setup.ldap.user.vcard.name=Name
setup.ldap.user.vcard.email=Email
setup.ldap.user.vcard.fullname=Full Name
setup.ldap.user.vcard.nickname=Nickname
setup.ldap.user.vcard.birthday=Birthday
setup.ldap.user.vcard.photo=Photo/Avatar
setup.ldap.user.vcard.home=Home
setup.ldap.user.vcard.street=Street Address
setup.ldap.user.vcard.city=City
setup.ldap.user.vcard.state=State/Province
setup.ldap.user.vcard.pcode=Postal Code
setup.ldap.user.vcard.country=Country
setup.ldap.user.vcard.phone=Phone Number
setup.ldap.user.vcard.mobile=Mobile Number
setup.ldap.user.vcard.fax=Fax
setup.ldap.user.vcard.pager=Pager
setup.ldap.user.vcard.business=Business
setup.ldap.user.vcard.title=Job Title
setup.ldap.user.vcard.department=Department
setup.ldap.user.vcard.personal=Personal
setup.ldap.user.vcard.avatardb=Store avatar in database if not provided by LDAP
setup.ldap.test.error-loading-sample=An error occurred while loading sample from LDAP. Check openfire.log for more information.
setup.ldap.test.internal-server-error=Test page is not able to find required information in HTTP session.
setup.ldap.user.vcard.test.description=A random profile is selected for you to review. Bold fields with no value mean \
that an error may have been found. To view another profile click 'Next random profile'. When you are finished close \
this window.
setup.ldap.user.vcard.test.random=Next random profile
setup.ldap.user.test.users-not-found=No users were found using the specified configuration. Try changing the base DN, \
user filter or username field.
setup.ldap.group.description=Configure how the server finds and loads groups from your LDAP directory. \
If you need additional information about a field, hover your mouse over the corresponding help icon.
setup.ldap.group.name_field=Group Field
setup.ldap.group.name_field_description=The field name that the group name lookups will be \
performed on. If this property is not set, the default value is cn.
setup.ldap.group.member_field=Member Field
setup.ldap.group.member_field_description=The field name that holds the members in a group. If \
this property is not set, the default value is member.
setup.ldap.group.description_field=Description Field
setup.ldap.group.description_field_description=The field name that holds the description a group. \
If this property is not set, the default value is description.
setup.ldap.group.posix=Posix Mode
setup.ldap.group.posix_description=A value of "Yes" means that users are stored within \
the group by their username alone. A value of "No" means that users are stored by \
their entire DN within the group. If this property is not set, the default value is No. \
The posix mode must be set correctly for your server in order for group integration to work.
setup.ldap.group.filter=Group Filter
setup.ldap.group.filter_description=An optional group filter to append to the default filter when \
loading groups. The default group filter is created using the group name. \
For example, if the group name field is "cn", then the default \
group filter would be "(cn={0})" where {0} is dynamically replaced with the \
group name being searched for.
setup.ldap.group.test.description=A small list of groups is selected for you to review. When you are finished close \
this window.
setup.ldap.group.test.label-description=Description
setup.ldap.group.test.label-members=Members
setup.ldap.group.test.group-not-found=No groups were found using the specified configuration. Try changing the base DN,\
group filter or member field.
# Setup finished Page
setup.finished.title=Setup Complete!
setup.finished.info=This installation of {0} is now complete. To continue:
setup.finished.login=Login to the admin console
setup.finished.wait=Please wait, finishing setup...
# Setup host settings Page
setup.host.settings.title=Server Settings
setup.host.settings.info=Below are network settings for this server.
setup.host.settings.domain=XMPP Domain Name:
setup.host.settings.domain.help=The name of the XMPP domain that this server will be part of (for example: example.org). If this server will be part of an Openfire cluster, each server must have the same XMPP domain name.
setup.host.settings.invalid_domain=Invalid domain.
setup.host.settings.fqdn=Server Host Name (FQDN):
setup.host.settings.fqdn.help=The fully qualified domain name of this server (for example: openfire.example.org). If this server will be part of an Openfire cluster, each server must have a unique server host name.
setup.host.settings.invalid_fqdn=Invalid host name.
setup.host.settings.port=Admin Console Port:
setup.host.settings.secure_port=Secure Admin Console Port:
setup.host.settings.invalid_port=Invalid port number
setup.host.settings.port_number=Port number for the web-based admin console (default is 9090).
setup.host.settings.secure_port_number=Port number for the web-based admin console through TLS (default is 9091).
setup.host.settings.restrict_localhost=Restrict Admin Console Access
setup.host.settings.restrict_localhost_info=Restrict access to the admin console to only local connections
setup.host.settings.encryption_algorithm=Property Encryption via:
setup.host.settings.encryption_algorithm_info=Select an encryption engine/algorithm to use when encrypting properties.
setup.host.settings.encryption_aes=AES
setup.host.settings.encryption_blowfish=Blowfish
setup.host.settings.encryption_key=Property Encryption Key:
setup.host.settings.encryption_key_info=For additional security, you may optionally define a custom encryption key.
setup.host.settings.encryption_key_invalid=You must input the same encryption key value twice to ensure that you have typed the hidden value correctly.
# Setup index Page
setup.index.title=Welcome to Setup
setup.index.choose_lang=Choose Language
setup.index.info=Welcome to {0} Setup. This tool will lead you through the initial setup \
of the server. Before you continue, choose your preferred language.
setup.index.success=Success
setup.index.error=Error
setup.index.vm=Java VM Support
setup.index.jdk=At least JRE 11
setup.index.found=Found: JVM
setup.index.class=Classes
setup.index.con_file=Configuration Files
setup.index.dir=conf Directory
setup.index.valid_conf=Valid conf directory.
setup.index.unable_locate_dir=Unable to locate valid conf directory. Please refer to the installation \
documentation for the correct way to set the conf directory.
setup.index.not_permission=Setup was able to find your conf directory but does not have read permission \
on it. Please alter the directory permissions.
setup.index.not_write_permission=Setup was able to find your conf directory but does not have write \
permission on it. Please alter the directory permissions.
setup.index.translator-invitation=Is the language of your preference not listed, or is the translation of that language not complete? You can easily help to improve the translations available in Openfire! Please have a look at our Transifex project page to get started!
# Setup pause Page
setup.pause.title=Please restart your server and close this window. Launch the admin console using \
either the launcher or start as a service to enter the admin console.
setup.pause.close=Close Window
# Setup sidebar Page
setup.sidebar.title=Setup Progress
setup.sidebar.language=Language Selection
setup.sidebar.settings=Server Settings
setup.sidebar.datasource=Database Settings
setup.sidebar.profile=Profile Settings
setup.sidebar.admin=Admin Account
# TLS settings Page
ssl.settings.client.label_custom_info=Advanced configuration
ssl.settings.client.plaintext.boxtitle=Plain-text (with STARTTLS) connections
ssl.settings.client.plaintext.info=Openfire can accept plain-text connections, which, depending on the policy that is configured here, can be upgraded to encrypted connections (using the STARTTLS protocol).
ssl.settings.client.plaintext.label_enable=Enabled
ssl.settings.client.directtls.boxtitle=Encrypted (Direct TLS) connections
ssl.settings.client.directtls.info=Connections of this type are established using encryption immediately (as opposed to using STARTTLS). This type of connectivity is commonly referred to as "Direct TLS".
ssl.settings.client.directtls.label_enable=Enabled
ssl.settings.server.label_custom_info=Advanced configuration
ssl.settings.server.directtls.boxtitle=Encrypted (Direct TLS) connections
ssl.settings.server.directtls.info=Connections of this type are established using encryption immediately (as opposed to using STARTTLS). This type of connectivity is commonly referred to as the Direct TLS.
ssl.settings.server.directtls.label_enable=Enabled
# Generic certificate-related messages
ssl.certificates.added_updated=Certificate added or modified successfully.
ssl.certificates.deleted=Certificate deleted successfully.
ssl.certificates.generated=Certificates generated successfully.
ssl.certificates.confirm_delete=Are you sure you want to delete this certificate?
ssl.certificates.alias=Alias
ssl.certificates.identity=Identity
ssl.certificates.status=Status
ssl.certificates.algorithm=Algorithm
ssl.certificates.self-signed=Self signed
ssl.certificates.signing-pending=Pending Verification
ssl.certificates.ca-signed=CA Signed
ssl.certificates.general-usage=Certificates are used (through TLS protocol) to establish secure connections \
between servers and clients. When a secured connection is being created, parties can retrieve a certificate from the \
other party and (amongst others) examine the issuer of those certificates. If the issuer is trusted, a secured \
layer of communication can be established.
ssl.certificates.version=Version
ssl.certificates.serialnumber=Serial Number
ssl.certificates.subject=Subject
ssl.certificates.issuer=Issuer
ssl.certificates.c=Country
ssl.certificates.st=State or province
ssl.certificates.l=Locality
ssl.certificates.o=Organization
ssl.certificates.ou=Organization Unit
ssl.certificates.cn=CommonName
ssl.certificates.alternative-name=Alternative Name
ssl.certificates.alternative-name.other=(Other Name)
ssl.certificates.alternative-name.rfc822=(RFC-822 Name)
ssl.certificates.alternative-name.dns=(DNS Name)
ssl.certificates.alternative-name.x400=(X400 Address)
ssl.certificates.alternative-name.directory=(Directory Name)
ssl.certificates.alternative-name.edi-party=(EDI Party Name)
ssl.certificates.alternative-name.url=(Uniform Resource Identifier)
ssl.certificates.alternative-name.ip-addres=(IP Address)
ssl.certificates.alternative-name.registered-id=(Registered ID)
ssl.certificates.valid-between=Valid between
ssl.certificates.validity=Validity
ssl.certificates.not-valid-before=Not valid before
ssl.certificates.not-valid-after=Not valid after
ssl.certificates.signature=Signature
ssl.certificates.signature-algorithm=Signature Algorithm
ssl.certificates.signature-algorithm-parameters=Signature Algorithm Parameters
ssl.certificates.identity-store=Identity store
ssl.certificates.trust-store=Trust store
ssl.certificates.trust-store.s2s=Trust store used for connections from other servers
ssl.certificates.trust-store.c2s=Trust store used for connections from clients
# Expiry check
sidebar.ssl.certificate.expirycheck=Expiry Check
sidebar.ssl.certificate.expirycheck.descr=Configure automated checking of the validity of TLS certificates.
ssl.certificate.expirycheck.title=Certificate Expiry Check
ssl.certificate.expirycheck.info=The server can periodically check for the validity of the certificates that are installed in Openfire's "identity" certificate stores. When a certificate is expired, or is about to expire, administrators can be sent a chat notification. Use the form below to configure this service.
ssl.certificate.expirycheck.settings-header=Settings
ssl.certificate.expirycheck.enabled.legend=Service Enabled
ssl.certificate.expirycheck.label_enable=Enabled
ssl.certificate.expirycheck.label_enable_info=The server will periodically check if installed TLS certificates are still valid (have not expired)
ssl.certificate.expirycheck.label_disable=Disabled
ssl.certificate.expirycheck.label_disable_info=No automatic validity checks are performed.
ssl.certificate.expirycheck.notification.legend=Administrator Notifications
ssl.certificate.expirycheck.notification.label_enable=Enabled
ssl.certificate.expirycheck.notification.label_enable_info=Administrators will receive notifications when certificates are expired or about to expire.
ssl.certificate.expirycheck.notification.label_disable=Disabled
ssl.certificate.expirycheck.notification.label_disable_info=Administrators will not be sent notifications.
ssl.certificate.expirycheck.frequency.legend=Frequency
ssl.certificate.expirycheck.frequency.info=This defines how often the server checks the certificate. The provided value is the interval (in hours) between each check.
ssl.certificate.expirycheck.frequency-label=Interval
ssl.certificate.expirycheck.warning-period.legend=Warning Period
ssl.certificate.expirycheck.warning-period.info=The server will issue warnings before a certificate has expired. The value below controls how long before expiry of a certificate the server should start generating notifications.
ssl.certificate.expirycheck.warning-period-label=Warning Period
ssl.certificate.expirycheck.error.frequency=The value provided for 'frequency' was invalid. Please provide a numeric value higher than zero.
ssl.certificate.expirycheck.error.warning-period=The value provided for 'warning period' was invalid. Please provide a different value. Please provide a numeric value higher than zero.
ssl.certificate.expirycheck.save-success=Settings have successfully been saved.
ssl.certificates.expirycheck.notification-message.expired=One or more TLS certificates used by Openfire have expired. This can cause connectivity issues. Please use the Openfire Admin Console to review the state of all certificates in each of Openfire's "identity" certificate stores. Replace certificates where need.
ssl.certificates.expirycheck.notification-message.nearly-expired=One or more TLS certificates used by Openfire will expire soon. This can cause connectivity issues. Please use the Openfire Admin Console to review the state of all certificates in each of Openfire's "identity" certificate stores. Replace certificates where need.
# Blowfish Migration
sidebar.security-blowfish-migration=Blowfish Migration
sidebar.security-blowfish-migration.descr=Migrate Blowfish encryption from SHA1 to PBKDF2 key derivation
security.blowfish.migration.title=Blowfish Encryption Migration
security.blowfish.migration.info=This page allows you to migrate encrypted properties from legacy SHA1-based Blowfish key derivation to the more secure PBKDF2-HMAC-SHA512 key derivation. This is a one-time migration that improves the security of your encrypted database properties.
security.blowfish.migration.not-blowfish=Your Openfire server is using {0} encryption algorithm. This migration tool only applies to servers using Blowfish encryption. No action is required.
security.blowfish.migration.already-migrated=Your Openfire server has already been migrated to use PBKDF2-HMAC-SHA512. No further action is required.
security.blowfish.migration.warning.title=Warning: Irreversible Operation
security.blowfish.migration.warning.irreversible=This migration operation cannot be reversed without restoring from backup. Once properties are re-encrypted with PBKDF2, they cannot be decrypted using SHA1 key derivation.
security.blowfish.migration.warning.backup=You must back up your database before proceeding with the migration
security.blowfish.migration.warning.cluster=In clustered deployments, all cluster nodes must be offline except the node performing the migration
security.blowfish.migration.warning.downtime=This operation may cause a brief service interruption
security.blowfish.migration.status.title=Current Status
security.blowfish.migration.status.current-kdf=Current key derivation function
security.blowfish.migration.status.encrypted-count-db=Encrypted properties in database
security.blowfish.migration.status.encrypted-count-xml=Encrypted properties in openfire.xml
security.blowfish.migration.status.using-pbkdf2=Your server is currently using PBKDF2-HMAC-SHA512, which provides strong protection against rainbow table and brute-force attacks.
security.blowfish.migration.checklist.title=Pre-Migration Checklist
security.blowfish.migration.checklist.db-backup=I have backed up the Openfire database
security.blowfish.migration.checklist.security-backup=I have backed up the conf/security.xml file
security.blowfish.migration.checklist.openfire-backup=I have backed up the conf/openfire.xml file
security.blowfish.migration.checklist.cluster-offline=All cluster nodes are offline (except this migration node)
security.blowfish.migration.button.migrate=Migrate to PBKDF2
security.blowfish.migration.confirm=Are you sure you want to proceed with the migration? This operation cannot be reversed without restoring from backup.
security.blowfish.migration.success=Successfully migrated {0} database properties and {1} XML properties from SHA1 to PBKDF2.
security.blowfish.migration.error=Migration failed
security.blowfish.migration.error.detail=Migration failed: {0}
security.blowfish.migration.error.backups-required=You must confirm all backups before proceeding with migration.
security.blowfish.migration.error.csrf=CSRF validation failed. Please refresh the page and try again.
security.blowfish.migration.help=For detailed migration instructions and documentation, see the
security.blowfish.migration.help.link=Blowfish PBKDF2 Migration Guide
security.blowfish.migration.detailed-guide-notice=A comprehensive migration guide with additional technical details is available in the Openfire documentation.
security.blowfish.migration.singlenode.title=Single-Node Migration Procedure
security.blowfish.migration.singlenode.info=Your server is running as a standalone (non-clustered) instance. Migration can proceed whilst the server remains operational, with zero downtime.
security.blowfish.migration.singlenode.step1=Back up your database using your database's backup tool (e.g., pg_dump, mysqldump)
security.blowfish.migration.singlenode.step2=Back up conf/security.xml and conf/openfire.xml files
security.blowfish.migration.singlenode.step3=Confirm all backups using the checkboxes below
security.blowfish.migration.singlenode.step4=Click "Migrate to PBKDF2" to begin the migration
security.blowfish.migration.singlenode.completion=Migration typically completes in under 10 seconds. The process uses a database transaction to ensure atomicity.
security.blowfish.migration.cluster.completion=After migration completes, you must sync configuration to other cluster nodes before restarting them: copy conf/security.xml to all nodes, sync any encrypted properties from conf/openfire.xml (see documentation), then verify all nodes have matching KDF and salt values before starting the cluster.
security.blowfish.migration.cluster.title=Clustered Migration Procedure
security.blowfish.migration.cluster.info=Your server is part of a cluster. Migration requires a maintenance window as all other cluster nodes must be offline during migration.
security.blowfish.migration.cluster.critical=Critical: You cannot have nodes with different KDF settings accessing the same database simultaneously. All nodes except this migration node must be stopped before proceeding.
security.blowfish.migration.cluster.step1=Schedule a maintenance window (15-30 minutes recommended)
security.blowfish.migration.cluster.step2=Stop all cluster nodes except this one
security.blowfish.migration.cluster.step3=Back up the shared database
security.blowfish.migration.cluster.step4=Back up conf/security.xml and conf/openfire.xml on all nodes
security.blowfish.migration.cluster.step5=Confirm all backups using the checkboxes below
security.blowfish.migration.cluster.step6=Click "Migrate to PBKDF2" to begin the migration
security.blowfish.migration.cluster.step7=After successful migration, stop this node
security.blowfish.migration.cluster.step8=Copy the updated conf/security.xml to all other cluster nodes
security.blowfish.migration.cluster.step9=Sync any encrypted property values from openfire.xml to other nodes (if applicable - see documentation)
security.blowfish.migration.cluster.step10=Verify all nodes have matching KDF and salt values in their security.xml files
security.blowfish.migration.cluster.step11=Start all cluster nodes and verify cluster health
security.blowfish.migration.cluster.single-node-safe=Single cluster node detected - safe to proceed. Clustering is enabled but only this node is currently running.
security.blowfish.migration.cluster.race-condition=Clustering is configured in openfire.xml but is not currently active. Other cluster nodes may be in the process of starting, which would cause them to have different KDF settings after migration completes.
security.blowfish.migration.cluster.wait-or-disable=Either wait for clustering to fully start (so all nodes can be properly coordinated), or disable clustering in openfire.xml before performing the migration.
security.blowfish.migration.error.multi-node-active=Migration blocked: {0} cluster nodes are currently active. Stop all other cluster nodes before migrating.
security.blowfish.migration.error.cluster-enabled-not-started=Migration blocked: Clustering is configured but not yet running. This indicates the cluster may be initialising, which creates a race condition risk. Please wait for the cluster to fully start or disable clustering before migrating.
# Store Management page
ssl.certificates.store-management.title=Certificate Stores
ssl.certificates.store-management.info-1=Certificates are used (through TLS protocol) to establish secure connections between servers and clients. When a secured connection is being created, parties can retrieve a certificate from the other party and (amongst others) examine the issuer of those certificates. If the issuer is trusted, a secured layer of communication can be established.
ssl.certificates.store-management.info-2=Certificates are kept in specialized repositories, or 'stores'. Openfire provides two types of stores:
The \ certificates that are used to identify this Openfire instance should be signed by a Certificate Authority (CA) that \ is commonly trusted by clients and other servers. This page allows you to generate a Certificate Signing Request \ (CSR), which you can use to obtain a signed certificate from such a Certificate Authority. After you obtain a reply \ from the CA to the CSR, that reply can be inserted in this page to install a CA signed certificate.
\Alternatively, a certificate might already be made available though other means. In this case the signed \ certificate and corresponding private key can be {0}imported here{1}. ssl.certificates.keystore.self-signed.info=Self-signed certificates should be signed by a Certificate Authority to be \ trusted and accepted by clients and other servers. ssl.certificates.keystore.signing-pending.info=The certificate is not yet signed by a Certificate Authority. A signing \ request should be sent to the Certificate Authority so that it can be signed by the CA. The CA will return a new \ certificate once it has been approved and signed. The returned certificate will need to be imported into the server. ssl.certificates.keystore.ca-signed.info=The certificate has been signed by a Certificate Authority. Clients and \ servers are expected to accept the certificate unless they do not trust the Certificate Authority that signed the \ certificate. ssl.certificates.truststore.ca-reply=Certificate Authority Reply: # Client & Server Truststore Page # Truststore Page ssl.certificates.truststore.c2s-title=Client Truststore ssl.certificates.truststore.s2s-title=Server Truststore ssl.certificates.truststore.title=Openfire Trust Certificate Store ssl.certificates.truststore.info=Certificates in this list are used by Openfire to verify the identity of remote clients and servers when encrypted connections are being established. By default, Openfire ships with a number of certificates from commonly trusted Certificate Authorities. ssl.certificates.truststore.link-to-import=Certificates can be added to this list by using this {0}import form{1}. # Certificate details Page ssl.certificate.details.title=Certificate details ssl.certificate.details.type-error=Type has not been specified (or is unrecognized). ssl.certificate.details.alias-error=The alias was not provided or does not refer to an existing certificate in this store. ssl.certificate.details.intro=Below are the details of the certificate with the alias {0} from the {1}. # Signing request page ssl.signing-request.title=Signing request ssl.signing-request.issuer_information=Issuer Information ssl.signing-request.issuer_information_info=Complete the following information of the certificate issuer. This \ information will be stored in the certificates pending to be sent to the Certificate Authority. The \ Certificate Authority will validate the information in order to sign the certificates. ssl.signing-request.offer-issuer-information=The issuer information for the certificates should be updated \ before sending the Certificate Signing Request (CSR) to a Certificate Authority (CA). Click {0}here{1} to \ update the issuer information. ssl.signing-request.ca_reply_info=Certificate reply can be added to the system by pasting \ in the certificate data sent to you by a Certificate Authority (e.g. Verisign). ssl.signing-request.name=Name ssl.signing-request.organizational_unit=Organizational Unit ssl.signing-request.organization=Organization ssl.signing-request.city=City ssl.signing-request.state=State ssl.signing-request.country=Country Code ssl.signing-request.enter_name=Please enter a valid name. ssl.signing-request.enter_ou=Please enter a valid organizational unit. ssl.signing-request.enter_o=Please enter a valid organization. ssl.signing-request.enter_city=Please enter a valid city. ssl.signing-request.enter_state=Please enter a valid state. ssl.signing-request.enter_country=Please enter a valid country. ssl.signing-request.save=Update information ssl.signing-request.requests=Generated Signing Requests ssl.signing-request.requests_info=Below you will find the signing requests generated for those certificates whose \ status is 'Pending Verification'. The exact process for sending the signing request to a Certificate \ Authority may vary. In general it is a matter of copying the generated signing request and paste it when generating \ new certificates in the Certificate Authority website. Certificate Authorities require you to register in their website, \ provide information about the company and verify the domain before being able to generate new certificates. ssl.signing-request.alias=Alias ssl.signing-request.signing-request=Signing Request # Restart HTTP server server-restart.title=HTTP Server Restart server-restart.info=The HTTP server will be restarted. In a few seconds you will be redirected to the login page. \ In case that redirection fails click {0}here{1} to go to the login page. # Compression settings Page compression.settings.title=Compression Settings compression.settings.update=Settings updated successfully. compression.settings.info=Clients and servers can connect to the server and compress their traffic. \ Use the following form to specify if the server will offer stream compression to clients and servers. compression.settings.client.policy=Client Compression Policy compression.settings.client.enable=Available compression.settings.client.enable_info=Clients will be offered the option to use compressed traffic. compression.settings.client.disable=Not Available compression.settings.client.disable_info=Clients will not receive the option to use compressed traffic. compression.settings.server.policy=Server Compression Policy compression.settings.server.enable=Available compression.settings.server.enable_info=Communication between servers will try to use compressed traffic. compression.settings.server.disable=Not Available compression.settings.server.disable_info=Communication between servers will not use compressed traffic. # General user user.read_only=Not allowed: the user account system is read-only. # User create Page user.create.title=Create User user.create.info=Use the form below to create a new user. user.create.error_creating_account=Error creating the user account. Please check the Openfire logs. user.create.invalid_username=Invalid username. user.create.user_exist=Username already exists - please choose a different one. user.create.invalid_name=Invalid name. user.create.invalid_email=Invalid email. user.create.invalid_password=Invalid password. user.create.invalid_match_password=Passwords don't match. user.create.invalid_password_confirm=Invalid password confirmation. user.create.invalid_group=Invalid group. user.create.created_success=New user created successfully. user.create.new_user=Create New User user.create.username=Username user.create.name=Name user.create.email=Email user.create.pwd=Password user.create.confirm_pwd=Confirm Password user.create.requied=Required fields user.create.create=Create User user.create.create_another=Create & Create Another user.create.isadmin=Is Administrator? user.create.admin_info=Grants admin access to Openfire user.create.group=Group # User delete Page user.delete.title=Delete User user.delete.info=Are you sure you want to delete the user user.delete.info1=from the system? user.delete.warning=Warning! You are about to delete your user.delete.warning2=own user.delete.warning3=user account. Are you sure you want to do this? Doing so will log you out of \ the system immediately. user.delete.delete=Delete User # User edit form Page user.edit.form.title=Edit User user.edit.form.update=User edited successfully. user.edit.form.info=Use the form below to edit user properties. user.edit.form.property=User Properties user.edit.form.enter_name=Please enter a valid name. user.edit.form.enter_mail=Please enter a valid email address. # User message Page user.message.title=Send Administrative Message user.message.send=Message sent successfully. user.message.send_admin_msg=Send Administrative Message user.message.info=Use the form below to send an administrative message to all users. user.message.specified_user_info=User the form below to send an administrative message to the \ specified user. If the user is connected from multiple sessions you will need to choose \ which session to message. user.message.to=To user.message.all_online_user=All Online Users user.message.send_session=Send to all user sessions user.message.valid_address=Please choose a valid address. user.message.message=Message user.message.valid_message=Please enter a valid message. user.message.send_message=Send Message # User password Page user.password.title=Change Password user.password.error_set_pwd=Error setting the password. Please make sure the password you enter is valid \ and matches the confirmation password. user.password.error_set_pwd_unsupp=Error setting the password. This operation is not supported with your current \ configuration. user.password.update=Password updated successfully. user.password.info=Use the form below to change the user's password. user.password.change=Change Password user.password.new_pwd=New Password user.password.confirm_new_pwd=Confirm New Password user.password.update_pwd=Update Password # User privacylists Page user.privacylists.title=Privacy Lists user.privacylists.info=This page contains all privacy lists for user user.privacylists.no_lists=This user has no privacy lists user.privacylist.is_default_list=(this is the default list) user.privacylists.no_items_on_list=There are no items on this privacy list. user.privacylist.allow=ALLOW user.privacylist.deny=DENY # User profile Page user.profile.title=Profile Information user.profile.info=This page shows the profile information that is published for this user. This information is typically available to the user's contacts. # User properties Page user.properties.title=User Properties user.properties.info=Below is a summary of user properties. user.properties.created=New user created successfully. user.properties.update=User properties updated successfully. user.properties.available=Available user.properties.offline=Offline user.properties.not_set=Not set. user.properties.not_available=Not available user.properties.registered=Registered user.properties.groups=Groups user.properties.none=None user.properties.locked=This account is currently locked out. user.properties.locked_set=This account has a lockout scheduled. user.properties.locksuccess=User locked out successfully. user.properties.unlocksuccess=User unlocked successfully. user.properties.isadmin=User has administrative privileges. user.properties.additional_properties=Additional Properties user.properties.never_logged_in=Never logged in before. # User roster Page user.roster.title=User Roster user.roster.info=Below is the list of roster items for user {0}. Shared groups are represented in the Groups column as underlined links to an associated group edit screen. Roster items provided by shared groups may not be deleted via this interface. user.roster.jid=JID user.roster.nickname=Nickname user.roster.groups=Groups user.roster.shared_groups=Shared Groups user.roster.subscription=Subscription user.roster.ask=Ask Status user.roster.cant_delete=This roster item is a member of a shared group and can not be deleted via this interface. user.roster.total_items=Total Items user.roster.sorted=Sorted by JID user.roster.items_per_page=Items per page user.roster.edit=Edit user.roster.add=Add New Item user.roster.none_found=No roster items found. user.roster.filter=Show user.roster.filter.all=All roster items user.roster.filter.noshared=No shared groups user.roster.filter.onlyshared=Only shared groups user.roster.click_view=Click to view... user.roster.deleted=Roster item deleted successfully. user.roster.delete.title=Delete Roster Item user.roster.delete.delete=Delete Roster Item user.roster.delete.info=Are you sure you want to delete the JID {0} from the roster of {1}? user.roster.edited=Roster item edited successfully. user.roster.edit.title=Edit Roster Item user.roster.edit.info=Use the form below to edit the roster item of user {0}. user.roster.added=Roster item added successfully. user.roster.add.title=Add Roster Item user.roster.add.info=Use the form below to add a new roster item for user {0}. user.roster.add.error_adding_item=Error adding roster item. Please check your server logs. user.roster.add.item_exists=Roster item of the same JID already exists. user.roster.add.uneditable_group=Attempted to remove item from a group that is not editable. (probably a shared group) user.roster.add.illegal_jid=JID was not of a valid format. user.roster.add.success=Successfully added roster item. user.roster.add.new_item=Add New Roster Item user.roster.add.add=Add Item user.roster.add.add_another=Add & Add Another user.roster.add.required=Required fields user.roster.item.settings=Roster Item Settings # User search Page user.search.title=User Search user.search.not_found=User not found. Please try a different search. user.search.search_user=Search For User user.search.search=Search # User Summary Page user.summary.title=User Summary user.summary.deleted=User deleted successfully. user.summary.total_user=Total Users user.summary.filtered_users_count=Filtered users user.summary.sorted=Sorted by Username user.summary.users_per_page=Users per page user.summary.created=Created user.summary.last-logout=Last Logout user.summary.edit=Edit user.summary.not_user=No users in the system. user.summary.locked=This account is currently locked out. user.summary.locked_set=This account has a lockout scheduled. # User tabs Page user.tabs.properties=User Properties user.tabs.edit=Edit User user.tabs.send=Send Message user.tabs.change_pwd=Change Password user.tabs.delete_user=Delete User # User Lockout Page user.lockout.title=User Lock Out user.lockout.info=Are you sure you want to lock out the user user.lockout.info1=from the system? user.lockout.warning=Warning! You are about to lock out your user.lockout.warning2=own user.lockout.warning3=user account. Are you sure you want to do this? Doing so will log you out of \ the system immediately if the lock out not set to start in the future. user.lockout.lock=Lock Out User user.lockout.unlock=Unlock User user.lockout.locked=The user {0} is locked out user.lockout.locked2=starting {0} user.lockout.lockedand=and user.lockout.locked3=ending {0} user.lockout.time.startdelay=Begin the lock out: user.lockout.time.duration=Lock out the account for the following duration: user.lockout.time.immediate=immediately user.lockout.time.forever=forever user.lockout.time.1hour=one hour user.lockout.time.1day=one day user.lockout.time.1week=one week user.lockout.time.in=in user.lockout.time.for=for user.lockout.time.minutes=minutes # User Groups page user.groups.title=User Groups user.groups.info=Below is a list of groups available for the user user.groups.member.info=Below is a list of groups for user user.groups.name=Group Name user.groups.form.update=User groups edited successfully. # PubSub Admin page pubsub.node.summary.title=PubSub Nodes pubsub.node.summary.info=Below is an overview of the Leaf Nodes in the PubSub service. pubsub.node.summary.total_nodes=Total Nodes pubsub.node.summary.filtered_node_count=Filtered Nodes pubsub.node.summary.nodes_per_page=Nodes per page pubsub.node.summary.sorted_id=Sorted by Node ID pubsub.node.summary.id=Node ID pubsub.node.summary.name=Name pubsub.node.summary.description=Description pubsub.node.summary.creator=Creator pubsub.node.summary.items=Items pubsub.node.summary.affiliates=Affiliates pubsub.node.summary.subscribers=Subscribers pubsub.node.summary.table.info=Node summary is show in the following table: pubsub.node.summary.table.no_nodes=No leaf nodes in the PubSub service. pubsub.node.summary.table.no_nodes_matching=No leaf nodes matches the search criteria. pubsub.node.summary.created=Created On pubsub.node.summary.modified=Last Modified pubsub.node.summary.click_config=Click to see configuration details... pubsub.node.summary.deleted=Node deleted successfully pubsub.node.summary.disabled-no-info=This PubSub service is currently disabled. This might prevent nodes from being displayed. # PubSub Edit Node pubsub.node.edit.title=Edit Node pubsub.node.edit.info=Use the form to edit configuration for node pubsub.node.edit.details_title=Details pubsub.node.edit.updated=Node configuration successfully updated pubsub.node.edit.detail.roster_groups_allowed=This information is only used when using the 'Roster' access model. pubsub.node.edit.detail.owner=Users with owner permission on the node. pubsub.node.edit.detail.publisher=Users with publisher permission on the node. # PubSub Delete Node pubsub.node.delete.title=Delete Node pubsub.node.delete.info=Are you sure you want to delete the node pubsub.node.delete.detail=from the system? pubsub.node.delete.details_title=Details pubsub.node.delete.node_id=Node ID: pubsub.node.delete.reason=Reason: pubsub.node.delete.delete_node=Delete Node # PubSub Node Published Items pubsub.node.items.title=Published Items pubsub.node.items.id=Item ID pubsub.node.items.publisher=Publisher pubsub.node.items.created=Created On pubsub.node.items.payload=Payload pubsub.node.items.table.info=Current published items are listed in the following table: pubsub.node.items.table.no_items=No items currently published to the node. pubsub.node.items.deleted=Deleted item published by {0} from the node. # PubSub Node Configuration pubsub.node.configuration.title=Configuration pubsub.node.configuration.table.info=The configuration of the node is shown in the table below. pubsub.node.configuration.details=Current Node Configuration # PubSub Node Affiliates pubsub.node.affiliates.title=Affiliates pubsub.node.affiliates.jid=JID pubsub.node.affiliates.affiliation=Affiliation pubsub.node.affiliates.subscriptions=Subscriptions pubsub.node.affiliates.no_affiliates=The Node has no affiliates. pubsub.node.affiliates.table.info=Current node affiliates are listed in the following table: pubsub.node.affiliates.table.no_affiliates=The Node has no affiliates. pubsub.node.affiliates.deleted=Deleted affiliation with {0} from the node. pubsub.node.affiliates.updated=Updated affiliation for {0}. pubsub.node.affiliates.delete.title=Delete Affiliate pubsub.node.affiliates.delete.info=Affiliation details: pubsub.node.affiliates.delete.info2=Current subscriptions for this affiliation (These will also be deleted): pubsub.node.affiliates.delete.info3=Are you sure you want to delete the affiliation? pubsub.node.affiliates.delete.confirm=Are you sure you want to delete the affiliation of {0} from node {1}? pubsub.node.affiliates.delete.table.no_subscriptions=This Affiliate has no subscriptions to the Node. pubsub.node.affiliates.delete.delete_affiliate=Delete Affiliate pubsub.node.affiliates.edit.title=Edit Affiliate pubsub.node.affiliates.edit.info=Current Affiliation details: pubsub.node.affiliates.edit.info2=Current subscriptions for this affiliation: pubsub.node.affiliates.edit.info3=Enter new affiliation: # PubSub Node Subscribers pubsub.node.subscribers.title=Subscribers pubsub.node.subscribers.owner=JID pubsub.node.subscribers.resource=Resource pubsub.node.subscribers.affiliation=Affiliation pubsub.node.subscribers.status=Status pubsub.node.subscribers.expires=Expires pubsub.node.subscribers.table.info=Current node subscribers are listed in the following table: pubsub.node.subscribers.table.no_subscribers=The Node has no subscribers. pubsub.node.subscribers.deleted=Deleted subscription owned by {0} from the node. # pubsub.node.subscribers.confirm_delete=Are you sure you want to delete this subscriber? pubsub.node.subscribers.delete.title=Delete Subscriber pubsub.node.subscribers.delete.info=Subscriber details: pubsub.node.subscribers.delete.info3=Are you sure you want to delete the subscriber? pubsub.node.subscribers.delete.delete_subscriber=Delete Subscriber # PubSub service tab pubsub.service.summary.title=PubSub Service Configuration pubsub.service.summary.updated=Service configuration updated successfully pubsub.service.summary.info=Use the form below to update service settings. pubsub.service.form.serviceEnabled=Service Enabled pubsub.service.form.multipleSubscriptionsEnabled=Multiple Subscriptions Enabled pubsub.service.form.detail.multipleSubscriptionsEnabled=Flag that indicates if a user may have more than one subscription with the node. When multiple subscriptions is enabled each subscription request, event notification and unsubscription request should include a subid attribute. pubsub.service.form.nodeCreationRestricted=Node Creation Restricted pubsub.service.form.detail.nodeCreationRestricted=A true value means that not anyone can create a node, only the JIDs listed in 'Allowed to Create' are allowed to create nodes. pubsub.service.form.allowedToCreate=Allowed to Create pubsub.service.form.detail.allowedToCreate=Users that are allowed to create nodes. An empty list means that anyone can create nodes. pubsub.service.form.sysadmins=System Administrators pubsub.service.form.detail.sysadmins=Users that are system administrators of the PubSub service. A sysadmin has the same permissions as a node owner. # PubSub generated form pubsub.form.clearSelection=Clear Selection pubsub.form.group=Group pubsub.form.user=User pubsub.form.not_valid="{0}" is not a valid {1}. pubsub.form.already_in_list={0} "{1}" already in list. pubsub.form.action=Action # Plugins Admin Page plugin.admin.title=Plugins plugin.admin.info=Plugins add new functionality to the server. The list of plugins currently \ installed is below. To download new plugins, please visit the \ Available Plugins page. plugin.admin.deleted_success=Plugin deleted successfully. plugin.admin.deleted_failure=Unable to delete plugin. plugin.admin.uploaded_success=Plugin uploaded successfully. plugin.admin.uploaded_failure=Unable to upload plugin. See server logs. plugin.admin.upload_plugin=Upload Plugin plugin.admin.upload_plugin.info=Plugin files (.jar) can be uploaded directly by using the form below. plugin.admin.click_reload=Reload the plugin. plugin.admin.reload_success=Plugin was successfully reloaded. plugin.admin.reload_failure=Unable to reload the plugin. Refer to the log files for additional information. plugin.admin.monitortask_running=The plugin manager is currently running. It may take a short time for the list of installed plugins to be complete. plugin.admin.name=Plugins plugin.admin.description=Description plugin.admin.documentation=Documentation plugin.admin.version=Version plugin.admin.author=Author plugin.admin.restart=Restart plugin.admin.no_plugin=No plugins installed. plugin.admin.confirm=Delete plugin? plugin.admin.download=Download plugin.admin.update-desc=New update is now available. plugin.admin.update.complete = Update Completed plugin.admin.version.available = Version {0} Available plugin.admin.changelog = Change Log plugin.admin.update = Update plugin.admin.updating = Updating plugin.admin.failed.minserverversion=The version of the plugin that is installed requires Openfire {0} or later versions! plugin.admin.failed.priortoserverversion=The version of the plugin that is installed is no longer compatible with Openfire {0} and later versions! plugin.admin.failed.invalidJar=The JAR file that was provided is not an Openfire plugin. plugin.admin.failed.minJavaVersion=The plugin requires Java specification version {0}. Openfire is currently running in Java {1}. plugin.admin.failed.missingParent=The plugin requires another plugin, named {0}, that currently is not installed. plugin.admin.failed.databaseScript=A plugin database install or update script failed. Review the logs for additional details. plugin.admin.failed.unknown=An exception occurred while loading plugin. Review the logs for additional details. plugin.admin.wildcards-exists=A plugin has loaded admin console authentication bypass patterns that includes a wildcard, but the System Property 'adminConsole.access.allow-wildcards-in-excludes' is disabled. # System Admin Console access system.admin.console.access.title=Admin Console Access system.admin.console.access.info=Use this page to control what network devices have access to the admin console. system.admin.console.access.success=Settings were successfully saved. system.admin.console.access.iplists.title=Network access control system.admin.console.access.iplists.warning=When you exclude the IP address that you are currently using (which appears to be {0}) when applying changes on this page, you will be locked out of the admin console! system.admin.console.access.iplists.blocklist.info=Any IP address that appears on the Blocklist will not be allowed to access the admin console. This list always takes precedence over the Allowlist. system.admin.console.access.iplists.blocklist.label=Blocklist system.admin.console.access.iplists.blocklist.invalid-hint=None of your changes have been saved. One or more of the values that you provided for the Blocklist was not valid. These values need to be IPv4 or IPv6 addresses or address ranges: {0} system.admin.console.access.iplists.allowlist.info=When the Allowlist is not empty, only IP addresses that is are on the Allowlist will be allowed to access the admin console. system.admin.console.access.iplists.allowlist.label=Allowlist system.admin.console.access.iplists.allowlist.invalid-hint=None of your changes have been saved. One or more of the values that you provided for the Allowlist was not valid. These values need to be IPv4 or IPv6 addresses or address ranges: {0} system.admin.console.access.iplists.ignore-excludes.info=By default, access control is not applied to 'excluded' pages (such as the login page). This can be overridden here. system.admin.console.access.iplists.ignore-excludes.label=Apply access control to 'excluded' pages. system.admin.console.access.iplists.help=This values can contain IP addresses (both v4 and v6) as well as IP address ranges. Ranges can use CIDR-notation (eg: "192.168.0.0/16", "2001:db8::/48"), or be dash separated (eg: "192.168.0.0-192.168.255.255"). When using dash separation, be careful not to include any whitespace characters in the range! Do not use []-notation for IPv6. system.admin.console.access.iplists.confirm_delete_ip=Are you sure you want to remove IP address/range \\''{0}\\'' from the list? system.admin.console.access.iplists.block-value=Block IP (or IP-range): system.admin.console.access.iplists.allow-value=Allow IP (or IP-range): system.admin.console.settings.xff.group=Support for XFF (X-Forwarded-For) headers system.admin.console.xff.label_enable=Enabled system.admin.console.xff.label_enable_info=Activate XFF support for proxied HTTP requests system.admin.console.xff.forwarded_for=HTTP header for originating client IP address (X-Forwarded-For): system.admin.console.xff.forwarded_server=HTTP header for proxied Server name (X-Forwarded-Server): system.admin.console.xff.forwarded_host=HTTP header for proxied Host (X-Forwarded-Host): system.admin.console.xff.host_name=Host name to be returned for all proxied responses: system.admin.console.xff.label_disable=Disabled system.admin.console.xff.label_disable_info=Disable XFF support system.admin.console.csp.group=Support for CSP (Content-Security-Policy) headers system.admin.console.csp.label_enable=Enabled system.admin.console.csp.label_enable_info=Add a CSP header to the response to HTTP requests. system.admin.console.csp.value=This value is used in the Content-Security-Policy headers that are added to HTTP responses. system.admin.console.csp.label_disable=Disabled system.admin.console.csp.label_disable_info=Disable CSP support # System Email system.email.title=Email Settings system.email.info=Use the form below to set the host and port of your email server (SMTP). At a minimum \ you should set the host and optionally you can set the port, username and password and whether \ or not to connect over TLS. If you have problems sending email please check the SMTP configuration \ on your mail server. Note, if you choose to enable mail debugging the debug output will be written \ to your appserver's standard out log. system.email.update_success=SMTP settings updated successfully. system.email.update_failure=An error occurred. Please verify that you have filled out all required fields \ correctly and try again. system.email.name=SMTP Settings system.email.mail_host=Mail Host system.email.restart_possible=may require appserver restart system.email.valid_host_name=Please enter a valid host name. system.email.server_port=Server Port (Optional) system.email.mail_debugging=Mail Debugging system.email.mail_debugging.enabled=On system.email.mail_debugging.disabled=Off system.email.server_username=Server Username (Optional) system.email.server_password=Server Password (Optional) system.email.ssl=Use TLS (Optional) system.email.save=Save Changes system.email.send_test=Send Test Email... system.emailtest.title=Email Settings system.emailtest.info=Use the form below to send a test message. By default, the senders email address will \ be that of the admin user. system.emailtest.no_host=Error, sending an email will fail because the mail server host is not set. Please \ go back to the {0}mail settings page{1} and set the mail host. system.emailtest.success=Message was sent successfully. Verify it was sent by checking the mail account you \ sent the message to. system.emailtest.failure=Sending the message failed. Please verify that your host and port settings \ are correct. system.emailtest.failure_authentication=Authenticating to the SMTP server failed - make sure your username \ and password are correct, or that "guest" users can authenticate to send emails. system.emailtest.mail_server=Mail Server system.emailtest.host_not_set=Not set system.emailtest.ssl=TLS system.emailtest.username=Username system.emailtest.from=From system.emailtest.to=To system.emailtest.subject=Subject system.emailtest.body=Body system.emailtest.send=Send system.emailtest.cancel=Cancel/Go Back system.emailtest.update-address=Update Address # System SMS system.sms.title=SMS Settings system.sms.info=Use the form below to configure the connection to your SMS server. The SMPP protocol will be used to \ establish a connection. At a minimum, you should provide the host address of the SMPP server, your systemId \ (which can be thought of as your username) the corresponding password and an optional system type, all of \ which should be supplied to you by your SMPP service provider. system.sms.update_success=Settings updated successfully. system.sms.config_failure=Configuration failure. Please verify that you have filled out all required fields \ correctly and try again. system.sms.name=SMPP Settings system.sms.host=Host Address system.sms.valid_host=Please enter a valid host address. system.sms.port=Port (Optional) system.sms.valid_port=Please enter a valid port number (between 1 and 65535). system.sms.systemId=SystemId (username) system.sms.valid_systemId=Please enter a valid systemId value. system.sms.password=Password system.sms.valid_password=Please enter a valid password. system.sms.systemType=System Type (Optional) system.sms.valid_systemType=Please enter a valid system type. system.sms.save=Save Changes system.sms.send_test=Send Test SMS... system.smstest.title=SMS Settings system.smstest.success=SMS was successfully sent. Verify it was sent by checking the SMS inbox of the recipient. system.smstest.failure=An error occurred while trying to send the SMS message. The error message: {0}. system.smstest.info=Use the form below to send a test message. Note that SMS does not guarantee speedy delivery, but \ generally, your message should arrive within moments. system.smstest.invalid-service-config=The SMS service has not been configured properly. Please go back to the {0}SMS \ settings page{1} and address all issues presented there. system.smstest.recipient=Recipient system.smstest.valid_recipient=Please enter a recipient (phone number) system.smstest.message=Message system.smstest.valid_message=Please provide a short message. system.smstest.send=Send system.smstest.cancel=Cancel/Go Back # File Transfer Proxy filetransferproxy.settings.title=File Transfer Proxy Settings filetransferproxy.settings.info=Use the form below to configure the file transfer proxy service. The \ proxy enables clients to efficiently transfer files when they are not on the same local network. filetransferproxy.settings.enabled.legend=Proxy Service filetransferproxy.settings.label_disable=Disabled filetransferproxy.settings.label_disable_info=This server will not act as a file transfer proxy. filetransferproxy.settings.label_enable=Enabled filetransferproxy.settings.label_enable_info=This server will act as a file transfer proxy on port: filetransferproxy.settings.label_port=Port: filetransferproxy.settings.label_hardcoded_address=Override reported address filetransferproxy.settings.label_hardcoded_optionality=(leave empty if an override is not needed) filetransferproxy.settings.valid.port=Please enter a valid port. filetransferproxy.settings.confirm.updated=File transfer proxy settings updated successfully. filetransfer.error.disabled=File Transfer Has Been Disabled, Proxy Won't Function. # File Transfer Proxy Stats stat.filetransferproxy.transfered.name = Proxy Transfer Rate stat.filetransferproxy.transfered.desc = The amount of data in kilobytes being transferred through the file transfer\ proxy. stat.filetransferproxy.transfered.units = Kb/s stat.filetransferproxy.transfered.amount.name = Proxy Transfer Data stat.filetransferproxy.transfered.amount.desc = The amount of data in kilobytes being transferred through the file transfer\ proxy. stat.filetransferproxy.transfered.amount.units = Kb # System Cache page system.cache.title=Cache Summary system.cache.cleared=Cache(s) cleared successfully. system.cache.info=The server relies on its cache to run efficiently. Below is a summary of all \ existing caches. To clear out the contents of a cache, click the checkbox next to the cache \ you want to clear and click "Clear Selected" below. system.cache.head.name=Cache Name system.cache.head.max=Max Size system.cache.head.lifetime=Max Lifetime system.cache.head.current=Current Size system.cache.head.percent=Percent Used system.cache.head.effectiveness=Effectiveness* system.cache.desc.effectiveness=* Effectiveness measures how well your cache is working. If the \ effectiveness is low, that usually means that the cache is too small. Caches for which this \ may be the case are specially flagged. system.cache.head.culls=Cache culls in last system.cache.total=Total: system.cache.clear-selected=Clear Selected # Upgrade process upgrade.database.missing_schema=Missing database schema for {0}. Attempting to install... upgrade.database.old_schema=Found old database version {0} for {1}. Upgrading to version {2}... upgrade.database.unknown_db=Warning: database type unknown. You must manually upgrade your database. upgrade.database.interbase_db=Warning: automatic upgrades of Interbase are not supported. You \ must manually upgrade your database. upgrade.database.success=Database update successful. upgrade.database.failure=Database update failed. Please manually upgrade your database. # Publish-Subscribe startup.starting.pubsub=Publish-Subscribe domain: {0} pubsub.form.default.title=Default Node configuration pubsub.form.default.instruction=Set the default configuration for newly created nodes. pubsub.form.conf.title=Node configuration pubsub.form.conf.instruction=Please provide the configuration for node "{0}". pubsub.form.conf.deliver_payloads=Deliver payloads with event notifications pubsub.form.conf.notify_config=Notify subscribers when the node configuration changes pubsub.form.conf.notify_delete=Notify subscribers when the node is deleted pubsub.form.conf.notify_retract=Notify subscribers when items are removed from the node pubsub.form.conf.presence_based=Only deliver notifications to available users pubsub.form.conf.send_item_subscribe=Send items to new subscribers pubsub.form.conf.subscribe=Allow subscriptions to node pubsub.form.conf.subscription_required=New subscriptions require configuration pubsub.form.conf.persist_items=Persist items to storage pubsub.form.conf.max_items=Max number of items to persist pubsub.form.conf.max_payload_size=Max payload size in bytes pubsub.form.conf.type=Type of payload data to be provided at this node pubsub.form.conf.body_xslt=Message body XSLT pubsub.form.conf.dataform_xslt=Payload XSLT pubsub.form.conf.access_model=Specify who may subscribe and retrieve items pubsub.form.conf.publish_model=Publisher model pubsub.form.conf.roster_allowed=Roster groups allowed to subscribe pubsub.form.conf.contact=People to contact with questions pubsub.form.conf.description=Description of the node pubsub.form.conf.language=Default language pubsub.form.conf.owner=Node owners pubsub.form.conf.publisher=Node publishers pubsub.form.conf.short_name=Short name for the node pubsub.form.conf.itemreply=Select entity that should receive replies to items pubsub.form.conf.replyroom=Multi-user chat room to which replies should be sent pubsub.form.conf.replyto=Users to which replies should be sent pubsub.form.conf.collection=The collection with which a node is affiliated. pubsub.form.conf.node_type=Whether the node is a leaf (default) or a collection pubsub.form.conf.children_association_policy=Who may associate leaf nodes with a collection pubsub.form.conf.children_association_policy.all=Anyone may associate leaf nodes with the collection pubsub.form.conf.children_association_policy.owners=Only collection node owners may associate leaf nodes with the collection pubsub.form.conf.children_association_policy.whitelist=Only those on a whitelist may associate leaf nodes with the collection pubsub.form.conf.children_association_whitelist=The list of JIDs that may associate leaf nodes with a collection pubsub.form.conf.children_max=The maximum number of child nodes that can be associated with a collection pubsub.form.conf.children=The child nodes (leaf or collection) associated with a collection pubsub.notification.message.body=This message contains an event notification pubsub.form.subscription.title=Subscription configuration pubsub.form.subscription.instruction=Please provide the subscription configuration for node "{0}". pubsub.form.subscription.deliver=Enable delivery? pubsub.form.subscription.digest=Receive digest notifications? pubsub.form.subscription.digest_frequency=Minimum number of milliseconds between sending any two \ notification digests pubsub.form.subscription.expire=Requested lease period pubsub.form.subscription.include_body=Receive message body in addition to payload? pubsub.form.subscription.show-values=Presence types which are allowed to receive notifications pubsub.form.subscription.subscription_type=Receive notification of items or nodes pubsub.form.subscription.subscription_depth=Receive notification from all or direct child nodes pubsub.form.subscription.keywords=Keyword to match pubsub.form.authorization.title=PubSub subscriber request pubsub.form.authorization.instruction=Use the following form to approve or deny the subscription \ request. pubsub.form.authorization.node=Node ID pubsub.form.authorization.subscriber=Subscriber Address pubsub.form.authorization.allow=Allow this JID to subscribe to this pubsub node? pubsub.command.pending-subscriptions.label=Authorize Pending Subscriptions pubsub.command.pending-subscriptions.title=Authorize Pending Subscriptions pubsub.command.pending-subscriptions.instruction=Select node to get pending subscriptions. pubsub.command.pending-subscriptions.node=Node pubsub.command.pending-subscriptions.error.idrequired=ID of node is missing. pubsub.command.pending-subscriptions.error.manyIDs=More than one nodeID was selected. pubsub.command.pending-subscriptions.success=Pending subscriptions have been sent. pubsub.command.pending-subscriptions.error.forbidden=Permission denied. pubsub.command.pending-subscriptions.error.badid=Invalid node ID was selected. # Connection Manager settings Page connection-manager.settings.title=Connection Manager Settings connection-manager.settings.info=Clients can connect to Connection Managers to reduce load on the \ server thus achieving greater scalability. Connection Managers will open a few connections \ to the server to transmit clients traffic. connection-manager.settings.label_custom_info=Advanced configuration connection-manager.settings.plaintext.boxtitle=Plain-text (with STARTTLS) connections connection-manager.settings.plaintext.info=Openfire can accept plain-text connections, which, depending on the policy that is configured here, can be upgraded to encrypted connections (using the STARTTLS protocol). connection-manager.settings.plaintext.label_enable=Enabled connection-manager.settings.directtls.boxtitle=Encrypted (Direct TLS) connections connection-manager.settings.directtls.info=Connections of this type are established using encryption immediately (as opposed to using STARTTLS). This type of connectivity is commonly referred to as "Direct TLS". connection-manager.settings.directtls.label_enable=Enabled connection-manager.settings.label_disable=Disabled connection-manager.settings.label_disable_info=Connection managers are not allowed to connect to this server. connection-manager.settings.label_enable=Enabled connection-manager.settings.label_enable_info=Connection managers can connect to this server. connection-manager.settings.port=Port: connection-manager.settings.valid.port=Please enter a valid port. connection-manager.settings.authentication=Authentication connection-manager.settings.defaultSecret=Password: connection-manager.settings.valid.defaultSecret=Please specify a default secret key. connection-manager.settings.confirm.updated=Connection managers information updated successfully. connection-manager.details.title=Active Connection Managers for server: {0} connection-manager.details.name=Name connection-manager.details.address=IP Address connection-manager.details.sessions=Client Sessions connection-manager.details.no-managers-connected=There are no active connection managers. # Manage updates Page update.notification-message=A server or plugin update was found: manage-updates.title=Manage Updates manage-updates.info=The server will automatically check for server or plugins updates. When new \ updates are found admins may receive notification messages with the updated components. \ Use the form below to configure the update service. manage-updates.config.updated=Configuration updated successfully. manage-updates.enabled.legend=Service Enabled manage-updates.label_disable=Disabled manage-updates.label_disable_info=Administrators will have to manually verify for server of plugin updates. manage-updates.label_enable=Enabled manage-updates.label_enable_info=The server will automatically check for server or plugins updates. manage-updates.notif.enabled.legend=Admins Notifications manage-updates.notif.label_disable=Disabled manage-updates.notif.label_disable_info=Administrators will not receive notifications when new updates are available. manage-updates.notif.label_enable=Enabled manage-updates.notif.label_enable_info=Administrators will receive notifications when new updates are available. manage-updates.proxy.enabled.legend=Connection Method manage-updates.proxy.label_disable=Direct Connection manage-updates.proxy.label_disable_info=Use a direct connection to the internet to check for updates. manage-updates.proxy.label_enable=Proxy Connection manage-updates.proxy.label_enable_info=Specify a proxy server to check for updates: manage-updates.proxy.host=Host: manage-updates.proxy.port=Port: manage-updates.proxy.valid.host=Please enter a valid host name. manage-updates.proxy.valid.port=Please enter a port greater than zero. # Available plugins page plugin.available.title=Available Plugins plugin.available.info=Plugins add new functionality to the server. The list of plugins available \ to install is below. Once a plugin is downloaded it may take a moment to be installed. The \ plugin will still appear in the list until it is actually installed. plugin.available.name=Plugins plugin.available.description=Description plugin.available.version=Version plugin.available.author=Author plugin.available.file_size=File Size plugin.available.install=Install plugin.available.no_plugin=No new plugins available. plugin.available.download=Download and Install plugin.available.installation.success = plugin installed successfully. plugin.available.commercial_plugins = Commercial Plugins plugin.available.outdated = The list of plugins below requires a newer version of the server. plugin.available.outdated.update = Update the server now. plugin.available.deprecated=These plugins that are installed are compatible with older versions of the server only. plugin.available.autoupdate = Available plugins list auto-updated on plugin.available.autoupdate.on = Auto update is turned on. plugin.available.autoupdate.off = Auto update is off. plugin.available.manual.update = Update Now. plugin.available.no.list = The list of available plugins has not yet been downloaded. plugin.available.no.plugin = Plugin information has not yet been downloaded. plugin.available.list = Click here to download. plugin.available.no.list.description = In order to install plugins, the list of available plugins must be downloaded. \ Once the plugins have been downloaded, you may \ choose which plugins to install. plugin.available.auto.update.currently = Auto-update is currently plugin.available.auto.update.currently.disabled = disabled plugin.available.click.here = Click here plugin.available.change = to change the auto-update settings. plugin.available.cancel.redirect = Leaving this page will cause all downloads to cancel. Leave anyway? plugin.available.error.downloading = Unable to download plugin(s). Please try again. # Server bytes statistics server_bytes.stats.incoming.name=Server Traffic server_bytes.stats.incoming.description=Kb of traffic per minute server_bytes.stats.incoming.label=Kb of traffic per minute server_bytes.stats.incoming.amount.name=Server Traffic server_bytes.stats.incoming.amount.description=Kb of traffic server_bytes.stats.incoming.amount.label=Kb of traffic server_bytes.stats.outgoing.name=Server Traffic server_bytes.stats.outgoing.description=Kb of traffic per minute server_bytes.stats.outgoing.label=Kb of traffic per minute server_bytes.stats.outgoing.amount.name=Server Traffic server_bytes.stats.outgoing.amount.description=Kb of traffic server_bytes.stats.outgoing.amount.label=Kb of traffic # javascript calendar calendar.info = About the calendar calendar.about = DHTML Date/Time Selector calendar.prev_year = Prev. year (hold for menu) calendar.prev_month = Prev. month (hold for menu) calendar.go_today = Go Today calendar.next_month = Next month (hold for menu) calendar.next_year = Next year (hold for menu) calendar.select_date = Select date calendar.drag_to_move = Drag to move calendar.part_today = (today) calendar.day_first = Display %s first calendar.weekend = 0,6 calendar.close = Close calendar.today = Today calendar.time_part = (Shift-)Click or drag to change value calendar.time = Time: # Enterprise Download Page plugin.enterprise.download.error = Unable to download the Enterprise plugin. Please try again. plugin.enterprise.dont.show= Don't show this page again plugin.enterprise.installing = Installing Enterprise Plugin... plugin.enterprise.installed = Enterprise plugin installed successfully. Refreshing momentarily... # web bind settings page httpbind.settings.title=Web Binding Settings httpbind.settings.info=Web bindings allow clients to use the web-based protocols (websockets and BOSH) to connect to the server. httpbind.settings.infobox-enabled.title=Web bindings are enabled. httpbind.settings.infobox-enabled.websocket-endpoints=Clients can connect to this server using websockets on these endpoints: